A Dutch company is focusing on high-end electric transport bikes for the consumer market and professional use. The aim is to introduce these products on the European market in 2013. The company is looking for engineering expertise and production... více
An East of England research organisation is developing an FP7 proposal under the FoF.NMP.2013-1 - Improved use of renewable resources at factory level call. An industrial partner is required to complete the consortium. A company that is active within the... více
An innovative SME from Kaluga region develops and manufactures the equipment for physical-chemical purification and concentration of sugar-containing solutions. The company looks for EU manufacturers of reverse-osmosis membranes for commercial... více
A SME in Sweden is looking for a new material with the following specification: A material that can be applied to approximately 5 µm of thickness minimum and that has low surface energy combined with mechanical strength. Further, the material shall... více
A Basque SME is looking for technical cooperation in intensive software solutions to be applied in the energy sector. It requires complementary knowledge in data acquisition and analysis for engineering projects. Partners are sought to carry out technical... více
An SME from Western Poland, which manufactures metal elements for construction and design is seeking solutions to polish elements made from steel, aluminium and copper in a fully automated process. The company is looking for partners for Technical... více
A Polish company is seeking technological partnership for development and implementation of a parquet woodblock sorting line with the machine vision (MV) quality system. The company is a wooden floor producer (parquet and plank floors production, delivery... více
A Polish company is seeking technological partnership. Company has a system of steam boilers, biomass, mainly straw, looking for partners who can help them in creating the technology of production of electricity and heat for low power. Also looking for... více
A Romanian company, dealing with passenger land transport (urban, suburban and metropolitan transport by busses, trolleybuses and trams) is interested in preparing a project proposal under the upcoming FP7-SMARTCITIES-2013, topic ENERGY.2013.7.3.2 call.... více
Prodej patentovaných nápadů za 30% z kupní smlouvy. více
Prodám nový patent (užitný vzor) „ZVĚTŠUJÍCÍ AKVÁRIUM“ Stěna akvária bude dioptricky ZVĚTŠOVAT cca o 300%. Výhody: NOVINKA na trhu EXKLUZIVITA PROMĚNLIVOST ryb v jejich velikosti, tedy stále JINÝ POHLED do akvária MENŠÍ... více
A UK London-based company has developed a novel, patented paper-based DVD/CD-holder, which has excellent environmental credentials and novelty-value. While the product is currently manufactured manually, the company is looking to automate their process.... více
Start-up company from Slovenia, specialized in developing propulsion system, has developed a new innovative propulsion system called NEPS-Novative Ecologycal Propulsion System based on photo-detonation engine. Motor Engine can be used for land, air and... více
A Slovenian SME has developed electro scooter with high performances and also offers special services in the field of renewable energy sources (supplying electric energy at the charging points for electric vehicles in town). Company is a supplier and... více
Andalusian Architecture School is preparing a proposal focused on ICT (Information and Communication Technologies) Energy-Efficient solutions to be integrated in the renovation of public buildings to reduce expenses [Smart Buildings].They look for:... více
A project consortium led by a Danish SME specialized in the production of sandwich façades proposes a project which is to develop a completely new building material translucent concrete in the form of a sandwich panel which can be used for facades... více
The UK branch of a global company aims to launch a new category defining rechargeable, electromechanical handheld consumer device, utilising cartridge-type consumables. They are looking for a partner or small group to lead on the project management and... více
A University in Cyprus is seeking partners to jointly submit a proposal to the FP7 ITN Networks Call for Proposals with the aim to study and research topics related to stone built structures and disseminate the results with various ways to interested... více
An Italian RTD performer is looking for partners for a FP7 "Research for the benefit of SMEs" grant application. The project aims to find a sustainable approach to the development of suitable bodies and glazes to produce artistic oeuvres to be used for... více
A Spanish company is preparing a proposal for the call "Research for the Benefit of SMEs" (FP7-SME-2013). The project will analyse and improve safety in mass production technologies regarding particular SMEs dealing with nanotechnological products and... více
A Spanish-French consortium made of research units and an innovation platform is looking for suppliers and end-users of materials to complete the consortium for the call EeB-NMP-2013-2 Safe, energy efficient and affordable eco-innovative materials for... více
A Spanish consultancy company in the field of construction, both buildings and infrastructures (roads, railways, ports, airports and hydraulic works) looks for SMEs with expertise on building advanced maintenance and pathologies evaluation for involving... více
An East of England based Research Centre is preparing a proposal for the Research for SMEs FP7 call and requires four partners to complete their consortium. The project aims to develop a zinc-free primer that possesses excellent welding characteristics... více
A research group from a Spanish University is preparing a proposal for the FP7 call GC-ICT-2013.6.7 Electro-mobility. The purpose of the project is to design a universal and open communication protocol, the standard DH Compliant, which allows the... více
A French Research institute specialised in water, environmental and land technologies is looking for a SME to participate in a consortium. The project will focus on the use of olive pomaces in order to produce bioactive packaging for food. Two main... více
A UK SME is Coordinator of an FP7 SME proposal that addresses permanent Passive Property Level Protection (PPLP) materials for new and existing buildings in areas of Europe prone to flooding. The project is concerned with testing of new and existing... více
A Hungarian research centre invites SMEs in the framework of the FP7 Research for the Benefit of SMEs call to participate in developing a technology that is able to manufacture prototypes of die castings relatively cheap and fast and so provide the... více
A Hungarian research centre invites SMEs to participate in an FP7 R4SMEs project to develop an innovative solution to engrave identification codes into metal parts using the cutting laser beam. The innovation is to make an extension to laser a cutting... více
A Spanish technology centre based in the Basque Country is looking for partners for the development and implementation of an innovative forming technique by means of cavitational impulses, to be submitted to the FP7-SME-2013 call (deadline for partner... více
An Italian big manufacturer of consumer products, exporting in more than one hundred countries is seeking a new process formulation to make fast cooking pasta. The product performance after cooking must be almost the same as that of the standard product.... více
An Italian RTD performer looking for partners for a FP7-SME-2013" grant application. The aim of the project is to set-up a near-net-shaping production process for piezoelectric ceramics of complex shape. Partners should have expertise in one of the... více
A European consortium covering three countries is looking for industrial partners for an FP7 project. The partners should have expertise in tool manufacturing and/or tool tempering for injection moulding with regard to energy, cycle time and scrap... více
A Spanish Technology Centre is looking for partners in order to prepare a FP7 proposal for the next SME-2013 call. The project aims to develop a food packaging system based on starch (totally biodegradable and obtained from renewable sources) having... více
A German research institute specialising in applied information technology plans to submit a proposal in the FP7 ICT programme Electro-mobility. The main objective is to develop a generic ICT-based software solution for planning, monitoring and... více
A Spanish Technology Centre is looking for partners in order to prepare an FP7 proposal for the next SME-2013 call. The project aims at manufacturing of complex and high value added non ferrous parts for different sectors, with focus on magnesium alloys.... více
The global leader in the sporting goods industry, located in Herzogenaurach, Germany, has been part of the world of sports for more than 80 years offering a broad portfolio of products and delivering state-of-the-art sports footwear, apparel and... více
An existing consortium is seeking an SME partner with expertise in the manufacture of ceiling or wall panels or indoor sound insulation panels to join a project proposal with the goal of developing a new composite insulation material with open... více
An Austrian Medical University is looking for industrial partners (SMEs) in the field of medical silicone implants and coating / impregnating of implant surfaces for a project in FP7HEALTH call (02/10/12). In the project their test system for prediction... více
The consortium is searching for SME and R&D partners with experience in nanophysics, nanotechnologies and production of nanomaterials, smart fabrics and nonwoven textiles for the project proposal for FP7-SME-2013-1 call. The project will develop quality... více
A South East UK SME is looking for an RTD partner (university, research centre) to join a consortium bidding for FP7 call: Research for the benefit of SMEs specifically to design and develop an electronic control board for pulse or nano-impulse... více
A Romanian company searches partners for a FP7 project aimed to demonstrate the feasibility and sustainability of the green city concept, by turning it in an environmentally sound, less environment-aggressive zone, coping better with natural habitats and... více
A UK coordinator seeks partners for a follow-on Demonstration Activity based on successful results to date in the development of innovative technology allowing increased thermophysiological comfort of Firefighters. The consortium seeks additonal partners... více
A small research company aimed at research of forming material would like to submit a project proposal to Eureka programme. The project aims to enhance lifetime and wear resistance of dies by the applying of new tool steels and new heat treatment... více
A Hungarian engineering and metal foam expert company would like to invite a partner to apply for the Eurostars programme, who is preferably a potential end-user, radiator or other heater manufacturer, ideally R&D SME located in Europe. The aim of the... více
A Finnish company and university are looking partners for a proposal under FP7 Environment programme. The project will develop and demonstrate granulation of industrial by-products and its utilization as a fertilizer in forests, as a road and groundwork... více
An Italian public research institution is looking for a large company for a FP7-PEOPLE-2013-ITN project. The project aims at developing hybrid organic-inorganic materials for photonic applications. The research institute is looking for LARGE COMPANY WITH... více
French research institute specialized in agrofood is looking for SMEs to participate to an FP7 project under call KBBE.2013.2.5-02 : Saving water and energy for resource-efficient food processing. The project aims at optimising existing dairy processes... více
A project consortium led by a Danish SME specialized in the production of sandwich façades proposes a project which is to develop a completely new building material translucent concrete in the form of a sandwich panel which can be used for facades and as... více
A company located in the North East of England with expertise in realising the potential of engineering concepts is looking for partners for a project to develop modular self-contained structures that can form functional workspaces for production... více
A consortium led by a German non-profit R&D company is looking for two additional SME partners to complete a proposal for the current Research for the benefit of SMEs call. The consortium is looking for one manufacturer of LED-based illumination and... více
A Brussels-based public authority is looking for partners to participate in an FP7 project on Integrated control systems and methodologies to monitor and improve building energy performance. Several types of partners are looked for (Enterprises,... více
A German R&D performer is looking for SMEs to join an FP7 "Research for SMEs" project. The project is focused on the development of a novel three axis turning technology for manufacturing of complex rotationally symmetric parts made of highly strengthened... více
A French company specialized in visual design support is looking for partners to develop their innovative project to help opticians with a glasses design software. The concept is fully developed and they would like to set up this software thanks to face... více
A UK based SME is coordinating an Eco-Innovation proposal aimed at developing a new family of composite materials for the construction industry made from recycled materials and materials from responsible renewable sources, which will provide a green... více
An Israeli SME acting in the Nanodiamond powder field of activity has developed and manufactures new Polishing slurries and Nanodiamond coating suspensions is looking for a partner who has the technologies ability to Building mass Nanodiamond production... více
An Israeli company specializes in the textile webbings worn by the field soldiers towards whom infra-red illumination is aimed seek for a partner with technology that enables deployment in the existing production process. The company is looking for... více
A Turkish hydraulic company serving to recyling sector with complete solutions is looking for tailor-made, low noise, single-shaft shredder to process RDF units of cement factories. The shredder is expected to be a part of the recycling system of the... více
A French company specialized in visual design support is looking for partners to develop their innovative project to help opticians with a glasses design software. The concept is fully developed and they would like to set up this software thanks to face... více
A South East UK University are looking for an automotive OEM partner to engage in a proposal for a project to be submitted to the EU Fuel Cell Hydrogen Joint Undertaking. The proposed project is planned around Fuel Cell Vehicles that could supply power... více
A Spanish consultancy company in the field of construction of buildings and transport infrastructure (roads, railways, ports, airports and hydraulic works) looks for entities to be involved in a project which deals with the development and demonstration... více
An FP7 project being developed by an East of England research centre requires a number of partners to complete the consortium. The project aims to develop an ultrasonic technique to characterise diffusion bonds in layered structures. An SME is required to... více
An spanish research centre based in the Basque Country is looking for SME machining in the automotive sector (end users become with the new material) and Reaserch Institutions for the characterisation, standarization and industrialisation of a new... více
A consortium coordinated by a UK imaging company in the security sector is seeking several SME and researcher partners for an FP7 project with the objective of developing an enclosure (cabinet) to detect threats using X-ray, passive radiation, ion... více
Dutch company is searching for partners to participate in an FP7 research project for zero energy or solar energy buildings that use energy and materials economically. Partners are asked to participate in the industrial and serial production... více
A company from Northern Sweden has developed a forensic analysis solution that uses hyperspectral image data to analyse in real-time the chemical content and surface distribution of the investigated samples. They are now looking for commercial and/or... více
A French SME, manufacturer of dental implant drills, is looking for a biocompatible product to identify its dental implants drills. For the moment, the company uses biocompatible paintings polymerized with an UV light. The goal is to improve the existing... více
An Italian enterprise working in the management of intermodal transport is looking for SME or research centers to develop a software system to carefully estimate external costs of transports, such as environmental impacts, accidents and congestion. These... více
A Turkish University is preparing an FP7 proposal for FoF.NMP.2013-10 call. The project aims to develop an advanced model for high performance machining. Companies and research organizations are sought as partners to deal with robotic applications for... více
An Spanish research organization specialised in the metallurgical sector and based in the Basque Country is looking for SMEs to participate in a project that aims to improve the strength and high temperature performance Al-Si-Mg alloys by the introduction... více
A Romanian company, dealing with passenger land transport (urban, suburban and metropolitan transport by busses, trolleybuses and trams) is interested in preparing a project proposal under the upcoming FP7-SMARTCITIES-2013, topic ENERGY.2013.7.3.2 call.... více
A UK university is preparing a proposal aimed to identify a process for the modelling, appraisal, analysis and improvement of energy performances of existing public sector building stock. The final goal of the project is to establish a methodology to... více
A European consortium covering three countries and coordinated by a French company involved in CCTV video images interpretation is looking for integrators of large management and surveillance systems in public transports & cities. On its side, the French... více
A European consortium covering three countries and coordinated by a French company involved in CCTV video images interpretation is looking for SMEs involved in real time statistics engine & database software. On its side, the French company will develop... více
An Austrian University acting as project coordinator for a proposal which will be submitted in the FP7-NMP-Factories of the Future Call, is looking for a SME partner which develops/ produces X-ray tomography equipment. The main objective of the project... více
A French SME has developped an easy system based on an electrical method to assess corrosion progress of metallic structures.The aim of this system is to anticipate various works related to corrosion degradation phenomenon and so finally lead to decrease... více
A Scottish (UK) SME with expertise and innovation in the treatment of waste sludge from sewage works via a process known as 'catalysed wet air oxidation' is seeking technical collaboration with engineering partners to construct, install, commission and... více
A Dutch company which is currently in the negotiation phase for a large EU Eco-Innovation grant is urgently looking for additional partners that can contribute on (international) market introduction and application development of biobased material for... více
SMEs operating in the fields of nanotechnology is looking for partners having expertise on thin nano-grained carbon and carbon nitride films with tunable chemical structure and morphology. The technical cooperation is aimed to achieve desired optical and... více
A UK based SME is coordinating an Eco-Innovation proposal aimed at developing a new family of composite materials for the construction industry made from recycled materials and materials from responsible renewable sources, which will provide a green... více
A UK SME and RTD provider have patented Carbon Nanotube (CN) production processes which if scaled up correctly will produce cost effective CN fibres and mats for a range of applications. The SME is coordinating a proposal for FP7-SME2-13 to design and... více
A French project leader is looking for a binder to produce a thermal insulating panel based on agricultural product. The material must be able to bind straw and/or corn cobs and/or grain bark. Ideally it will be an ecological material with thermical... více
A French SME specialized in products for health, wellness and beauty treatment is developping several products from natural ingredients and high qualify organic. This SME is looking for European partners able to help it to develop its range of products:... více
A German SME designs and manufactures innovative opto-electronical products based on femtosecond laser technology. The product range includes devices for non-contact cutting of biological tissue and various materials as well as instruments for precise... více
A Turkish company in chemicals, cleaning and sanitary sector is looking for partners for their EUREKA project. The project aims to develop a new design of pilot tissue production system to consume less electricity and energy and to enable the reuse of... více
A European consortium currently consisting of six partners is looking for SMEs as end users for superior hard magnets that are objective of the FP7 project. The magnets produced by MIM will show better performance than bonded ones and production will be... více
A group of Italian young inventors is searching for a partner that can realize a prototype for an innovative kite for kitesurfing, whose patent is pending. Preferably the partner should have experience in kite development, production and marketing... více
A German logistic cluster with some members are developing an innovative city freight logistic concept for metropolitan areas. Within a Marco Polo Traffic Avoidance Action, a cooperation network of retail companies bundling distribution warehouses and... více
A German research institute, dealing with packaging technologies, jointly with an Austrian research institute is looking for partners to develop novel optical quality control systems for polymer packaging in process industries under the upcoming FP7... více
A French start-up specialized in manufacturing of nanopowders provides an innovation based on nanoparticles. This innovation is dedicated for high-tech ceramics. This French start-up is looking for partners to bring strong partnership as joint venture,... více
A UK specialist in waste heat recovery seeks a an SME partner with design and manufacture expertise in heat exchangers for vehicles/or marine applications. The company should offer knowledge and experience of stainless steel heat exchangers and have... více
A well known Dutch research institute is looking for SMEs willing to participate in an FP7 research project to develop new solutions based on video analysis for frequent petty crimes that are of high impact to local communities and citizens (Developing... více
An Icelandic design company is looking for manufacturer, that specialises in production of coated or laminated fabrics. The company has been developing such fabrics for several years now, but seeks more specialisation and know-how. The fabrics are being... více
An East of England based Research Centre requires either an SME thermoplastic rod manufacturer or an SME thermoplastic composite part/assembly manufacturer to participate in an FP7 Research for SMEs project. The project aims to address the industrial... více
A Spanish research centre searches partners for a project aimed to develop composite materials based on renewable resources (physically modified polylactic acid (PLA) grades and colourless natural fibres) with improved thermal, mechanical properties and... více
A Flemish company is looking for a supplier of metallic silver (or nanosilver) in accordance with biocide legislation in Europe and the US. In their (national funded) R&D project they are implementing silver to obtain an antimicrobial effect. They are... více
A Swiss company is aiming to develop a small telescope for Earth Observation, targeting the small satellites segment and a wide range of observation applications. The company, which has a large experience of successful developments of miniaturized cameras... více
The Hungarian firm deals with the production of special hard metal and steel tools, production of tools and chipped parts. One part of the tool production activity is the designing and production of the extruder tools. The designing and producing... více
A Hungarian research centre invites SMEs to the FP7 Research for the Benefit of SMEs call and invites SMEs partners to participate in developing a new, laser micro-machining, self-lubricating technology that can be applied to a wide variety of cold... více
The project is based on innovative and cost-effective technology,which allows conversion of wood products into durable products made of composite wood with natural wood appearance and significant improvement of properties such as resistance to all kinds... více
A consortium, led by a German non-profit R&D company that focuses on XXL products, e. g. wind turbines, airplanes, and ships, is due to set up an FP7 "Research for SMEs" project in order to improve the assembly of XXL products by means of an optical... více
A Hungarian Research Institute is intended to submit a proposal to the FP7 'Research for SMEs' call and invites SME partners to participate in developing a novel technology that aims to decrease oxygen content in methan rich gases. SMEs experienced in... více
An SME from Northern Sweden has designed a novel system that will replace conventional reinforcement of concrete. A number of technical advantages are present and large economical benefits can be made. The company is looking for a partner that can... více
A French company specialized in animal breeding seeks a supplier of veterinary insemination catheters. The company is looking for industrial manufacturers to produce the specific catheters by plastic injection. These catheters are dedicated to animal... více
A French SME is looking for an experienced industrial partner or centre for applied research to jointly develop thermal conductive materials with excellent electrical insulator properties. It is interested by conductive polymers and silicones, aluminium... více
A leading French company in the defense industry is currently co-developing an innovative open source toolset to support formal verification of requirements and properties using model checking on automated generated formal transitions systems with... více
A German SME active in the development and production of glass and integrated energy solutions for buildings is searching for partners for the further development of an efficient low cost turbine for low temperature applications with a power range between... více
A SE UK university is searching for partners to develop realistic and predictive deterioration models of existing reinforced concrete structures, which can be applied to cost-effective maintenance and management of concrete infrastructure. Industry and... více
A Hungarian Research Institute is intended to submit a proposal to the FP7 'Research for SMEs' call and invites SME partners to participate in developing a novel technology that aims to decrease oxygen content in methan rich gases. SMEs experienced in... více
A German SME, with main activity in development and production of water and waste water treatment equipment is looking for any kind of conductive non-stick coating for metal surfaces. The coating should be hydrophobic or non-polar. It may consist of... více
A German SME, with main activity in the treatment of water and waste water is looking for any kind of adsorbent not based on activated carbon. They are looking for a joint further development, testing of new applications, or adaptation to specific... více
At a Czech University was developed a unique method of SMART textile sensors production. These sensors allow by visual comparison with standard scale to evaluate approximate intensity of UV-A radiation. The research centre is looking for industrial... více
An Italian company acting in the sector of fuel cell systems for mission-critical backup power applications is looking for a metal sheet to be used as an electrode for alkaline cells. The peculiarity of the electrode is that it has to be of two different... více
A Spanish research group is seeking for non-Spanish SMEs to complete their consortium for the FP7-SME-2013 "Research for the benefit of SMEs" call (Expected publication data: July 2012). The main objective of this project is the design and calibration of... více
A Technological Institute from Spain seeks a technology to determine the effectiveness of insecticides when used to treat tissues. The measurement system should detect the amount of insects repelled from the fabric and the amount knocked down. The insects... více
Czech automotive SME is looking for partners focused on research and development electronics systems especially for automotive area for joint research and development projects. The SME is open to initial project discussion from companies as well as public... více
A German research institute, dealing with packaging technologies, jointly with an Austrian research institute is looking for partners to develop novel optical quality control systems for polymer packaging in process industries under the upcoming FP7... více
A catalonian based organization is looking for a company in the food additives sector to obtain new extraction systems to be tested in order to reduce the process cost. Partners for a EUREKA project, technical cooperation and manufacturing agreement with... více
A german university department, which is part of a multidisciplinary institute of biochemistry and biology that provides facilities for biophysical, physiological, molecular and biochemical research on plants, is looking for collaboration partners. For... více
A SME from Tomsk specializing in LED light source development and manufacture is searching for manufacturer/developer of radiators for LED lamps of irregular shape that specializes in precision molding (under pressure) of aluminium alloys, extrusion,... více
A small Czech company dealing with renewable energies is looking for a partner with experience in direct methanol fuel cell production. They are developing a pilot device able to work as an off-grid source of energy. The company has already undertaken... více
A Czech SME active in the development of complete solutions with small water turbines is looking for a generator with permanent magnets for small water falls suitable for a low speed pilot applications. The range of power of the generator is from 5 up to... více
A Czech company active in the development of complete solutions and reconstructions of small water power plants is looking for a magnetic sealing of shaft able to tightly seal in water. The sealing will be used in small water turbines. The advantage of... více
A Spanish consulting SME is supporting the coordinator of the proposal in order to find the most appropriate partner for a project aimed to change the energy behaviour of consumers through a 2.0 communication and awareness campaign. The searched partners... více
A company from north-west Poland which develops automation systems and software simulators for military and navy is looking for a know-how concerning software for combat simulators (infantry, vehicle, ships, planes). SME wants to improve their current... více
A large US company is looking for proposals from joint development partners for technology that removes organic substances (CODCr) contained in industrial wastewater and sewage. They are interested in joint development, technology licensing. Today,... více
A large US company is looking for proposals for long-term co-development partners to produce a highly transparent substrate with low thermal expansion. They are interested in joint development, contract research, supplier agreement, technology... více
A large US company is looking for proposals for technologies for efficiently removing salt from concentrated water generated by reverse osmosis (RO) of wastewater. They are interested in joint development and technology licensing. One type of... více
A large US company is looking for proven technology to reduce gaseous air pollutant emissions from power plants. They are interested in contract research, consulting engagement, or commercial engagement. The client operates an electric power utility... více
A large US company is looking proposals for development partners for optical distance measurement devices that have excellent performance with regard to distance measurement, viewing angle, distance resolution, and equipment size. They are interested in... více
A large US company is looking for proposals for innovative ultra bendable protective solution which is applicable to front cover material for future communication devices. They are interested in contract research, joint development, technology... více
A large US company is looking for proposals for fibrous protein denaturation techniques that are highly effective and selective under mild conditions. The end result of these techniques will be dissolution or disintegration of the bulk material. They... více
A Greek SME active in geophysics is looking for an Israeli SME with expertise in vehicle positioning and 3D spatial visualisation, especially for roads and highways inspection. The Greek SME is the proposer of a proposal to be submitted under a bilateral... více
A German-led consortium is looking for additional partners to complete the line-up for a FP7 "Research for the benefit of SMEs" proposal. Wanted: A company/forge with interest in cross wedge rolling (CWR) and a strong interest in improving the process in... více
An FP7 project being developed by an East of England research centre which aims to develop on online inspection system for Fresnel lenses with on-line testing of the resulting modules. To complete the consortium a partner involved in the... více
A Hungarian Research Institute, as a project representative invites SME partners to a proposal to the FP7 Research for SMEs call (FP7-SME-2013-BSG). The aim is: to develop an innovative diagnostic system for on-line acoustic control of pump condition. The... více
A global 1000 original equipment manufacturer invites parties with non-glare display capacities and expertise in display optics and haptics to provide proposals for joint development and consulting. They are interested in licensing, product acquisition,... více
A global automotive parts manufacturer, which has the largest market share in on-vehicle fuel pumps in the world, seeks joint development partners for innovative high efficiency pumps for next-generation gasoline vehicles. They are interested in joint... více
A global automotive parts manufacturer, which has the largest market share in on-vehicle fuel pumps in the world, seeks joint development partners for innovative high efficiency pumps for next-generation gasoline vehicles. They are interested in joint... více
A major petrochemical company, invites proposals for a non destructive technique that can accurately measure the thickness profile of the bottom plate (or floor) of an atmospheric hydrocarbon storage tank that remains in operation. They are interested in... více
An Icelandic SME is developing unique software which is to be connected to media websites. When reading online news, people can see a question mark (?) appearing on the page just like on Facebook and Twitter. People can click on the mark when they want... více
A research institution based in Cyprus is looking for a solar thermal receiver to be incorporated in a small-scale (a few tenths of KW) solar thermal demonstration unit which is constructed as part of an EU funded project. The solar receiver should... více
A Russian university R&D team from St.Petersburg develops fiber-optic sensor for measuring vibrations based on the mode interference at the output of a multimode fiber. The advantage of the system will be its cheapness and the possibility to localize the... více
A French company, specialised in the development of customised and robust embedded systems, is looking for a technical cooperation in harbour operations and customs clearance in order to validate a to-be-developed advanced container management... více
A French SME, specialized in introducing fragrances on multiple materials such as advertising or printable supports, is looking for microfibres providers. The microfibre must be polyester-made, and of "clean, unpolluted" origin (as biological or chemical... více
A Turkish SME, active in applied research and development projects, seeks micro urea biosensor for detecting and measuring urea concentration in small volumes. The sought sensor shall be in specific forms and formats for fitting to the project... více
A French company is looking for a foundry for manufacturing monolithic components from Titanium or Cobalt-based alloys for biomedical parts. These monolithic components could be manufactured by resin shell casting, investment casting, centrifugal casting,... více
A Scottish based social enterprise is involved in the processing of domestic and business WEEE in compliance with the Waste Electrical Equipment (WEEE) Directive 2007. They are seeking assistance in identifying new reuse and recovery capabilities for WEEE... více
A large US company is looking for proposals for co-development of a far-infrared(FIR) image sensor based night vision system. They are interested in joint development, supplier agreement, technology acquisition, licensing, consulting, etc. Night... více
A large US company is looking for proposals for Packaging Design or Entomological Solutions to prevent insect larva from infesting wrapped Snack Food products. They are interested in licensing, product acquisition, contract research, proof of concept... více
A large US company is looking for proposals for renewably sourced materials that can provide good barrier properties when delivered from aqueous systems. They are interested in licensing, product acquisition, contract research, proof of concept leading... více
A large US company is looking for proposals for novel sensors that can measure oxides of nitrogen in the exhaust gas of engines running at stoichiometric or leaner fuel/air ratios. They are interested in licensing, product acquisition, contract research,... více
A UK company seeks partners for an EU tender opportunity to develop new methods and business models for the recycling of mixed plastic waste. The tender is in five parts, with the first three parts related to the analysis of material mass flows,... více
The Danish company, which sheet steel can be found in ships, cars, pumps, lifts, refrigerated display cabinets, furniture, doors and vehicle cabins around the world, is working on a project idea focusing on rubber coating of sheet steel. A number of its... více
A Turkish SME in ready food industry is looking for partnership for developing a database of F values, used in food industry. The research to be performed also aims scrutinizing the sources of varieties and dependence on types of foods of these values.... více
An Israeli SME, which specialises in rapid cooling applications and energy storage, is looking for Uninterruptible Thermal Supply System to modernise and improve via integration with their green & efficient slurry ice technology for power supply... více
An Austrian SME on behalf of a Europe wide consortium seeks partners with experience in the fuel cell arena for both testing and marketing of a low wattage portable fuel cell unit. The project aims to develop a portable power unit running on Compressed... více
The UK company, part of a multinational, is looking for products, services and e-commerce solutions for the elderly care and assisted living markets. Ideally, these will have just made it to the market or are market ready. The company can assist with... více
A German enterprise works as highly specialised manufacturer of transport tanks made of steel. To extend its portfolio the enterprise seeks for an innovative wastewater treatment having unique selling proposition. A high standard is required which can be... více
An IT-company from Saxony plans to coordinate a project under the open call in ICT-PSP. The project shall result in a new web-based software solution for national and regional authorities, rescue services and the interested public. In particular it... více
A German university is looking for a SME specialised in Nuclear magnetic resonance spectroscopy (NMR) of exopolysaccharides in order to complete the consortium for an EraNet proposal. The project aims to identify and to obtain novel promising microbial... více
A Spanish technological company composed of a multidisciplinary team searches for partners to participate in its project that will be submitted to next Eurostars call (deadline: Autumn 2012). The proposal intends to develop a paint capable to illuminate... více
An Italian social cooperative is preparing a proposal for the call Programme Med 2007 - 2013 Priority Axis 2: Protection of the environment and promotion of a sustainable territorial development. The project proposal is to develop a transnational... více
A consortium led by a municipality in Southern Sweden, together with a regional port consortium (transnational region Denmark/Sweden), and a large international energy company, wants to develop a project and apply for funds from the Intelligent Energy... více
A Turkish company engaged in plastic packaging industry is looking for innovative, cost-efficient and functional packaging solutions in food industry. The company is willing to increase the portfolio of its services and product differentiation capability... více
A small Czech company aimed at automation of buildings is looking for ICT companies or partners with customer base in governmental and municipality sector interested in electronic file archiving. Project partners for joint further development are sought... více
A French SME based south of Paris is looking for agrifood optimization experts for optimizing raw materials' flows. Competences in raw materials'desalination is also sought. The company is looking for agrofood-related engineering offices able to develop... více
A Hungarian research centre is looking for an SME specialized in the distribution of medical devices for a running FP7 project that aims at developing a rapid, accurate, and portable capacitance-based bioanalytical sensor for the detection of trace... více
The client is seeking high-performance adhesives for use in semiconductor manufacturing equipment. The challenge is to find an adhesive with excellent heat resistance that can maintain the bond at high temperature between materials with different thermal... více
A Latvian company operating in production of eco- friendly toys is looking for an innovative compact stuffing machine for plush toys. The equipment should be suitable for eco-organic fabrics. The device should be manually operated and safe for employees... více
A Latvian company operating in production of design toys is looking for a laser fabric cutting device for small and precise details. The equipment should be suitable for cutting velour, velvet and organic cotton fabrics. The company is looking for... více
A large US company is looking for proposals for compact power quality measurement devices that can be attached to generators and transmission lines. They are interested in consulting contracts, technology licensing or joint development... více
A large US company is looking for proposals for compact head-up displays that can display 3D images on an automobile windshield. They are interested in joint/contract development, licensing, product supply. The client performs research and development... více
A large US company is looking for proposals for joint development partners to implement catalysts for exhaust gas purification without using precious metals. They are interested in joint/contract development, technology licensing. Today, with... více
A Korean company in ICT sector is seeking partners for a EUREKA project on image processing technology for data recording unit of intelligent rail road system. The partner will take part in development of image processing algorithm for date recording unit... více
An Italian company developing diagnostic tools for foodstuff and supplying diagnostic services for SMEs of the agro-food sector, is looking for new devices/methods for quick and reliable detection of pathogens in foodstuff. The company is interested in... více
An Italian company, producing models and dies for foundry, is looking for new 5-axis CNC machines ensuring high performances in terms of accuracy and speed. The company is interested in commercial agreements. An Italian company, realizing models and... více
A Swedish SME within the door automation sector is looking for a partner that could help them with their last steps of their product development and to put the product on the market. They need help in finishing the design of electrical parts of their... více
A Turkish SME is looking for a partner in the field of motor vehicle conversion into electric vehicle. The company wants to provide electric batteries, charging centers/stations for electric vehicles. The developed/under development technology is... více
A Turkish SME with experience in Mobile Applications for iOS and Android platforms, Custom Solutions Development, Database and Data Communication Protocols is looking for partners for a EUREKA / Eurostars project. The project aims to develop a stand-alone... více
A Finnish business association is looking for a third consortium partner to a DG Enterprise and Industry project Entrepreneur Education (Ref: 28/G/ENT/CIP/12/E/N01C01). The main purpose of the project is to develop, test, use and disseminate tools and... více
A UK-based university is seeking a collaborative partner who can provide test samples to enable the further development of a suite of fluorescent tags. These tags are in development to be tailored to a variety of organic species that are in the... více
Some Italian companies are looking for partners to present a project in the theme 1 Objective 1.1 Smart urban digital services for energy efficiency. The project idea the consortium deals with the proposal to validate a system for monitoring and control... více
A Turkish SME is carrying out research on emerging technologies mainly in defense and aims to turn this research into applicable results. Innovative design methodologies on audio and video processing applications for defense industry that gives enough... více
A French SME, specialized in basin management and tools development to assess water quality, has developped a decision support software that allows the user to exploit the resources of a calculation platform (eg parallel computing clusters). Scientific... více
An Israeli solar energy company is looking for a partner for the continuation of development activities of three prototypes of a new microturbine already designed and partially tested. This micro turbine with the company's new photovoltaic solar systems... více
A large US company is looking for proposals for high temperature tolerant, high resistivity materials. They are interested in licensing, product acquisition, contract research, proof of concept leading to scale up to manufacturing, joint development... více
A large US company is looking for proposals laboratory studies of the decomposition of antiknock gasoline additives to form metal deposits. They are interested in licensing, product acquisition, contract research, proof of concept leading to scale up to... více
A large US company is looking for proposals for a high performance and high durability thermal insulation coating, in order to suppress head conduction from combustion gas to chamber components (piston, cylinder head, valve, etc.) in the combustion... více
A Spanish ICT SME specialized in business intelligence, systems engineering and architecture for eHealth proposes the analysis, design and construction of a complex software platform focused to improve the efficiency, strategic focus, collaboration and... více
A large US company is looking for proposals for high efficiency DC/AC inverters for photovoltaic systems. They are interested in joint/contract development, licensing, module supply. The company is developing technologies to enable high efficiency on... více
A large US company is looking for proposals for a transparent and highly heat resistant resin with low coefficients of linear expansion, similar to that of glass. They are interested in joint or contract development, material supply. The company is... více
A large US company is looking for proposals for planarizing local nano-scale bumps and divots on a flat SiO2-based glass substrate without increasing its surface roughness. Planarization methods can be either polishing or filling. They are interested in... více
Turecká společnost vyrábějící olivový olej generuje každou sezonu velké množství odpadní vody z lisovny oleje a má rovněž kapacity pro shromažďování ještě většího objemu odpadní vody ze svého regionu. Za účelem zužitkování... více
A large US company is looking for proposals for development of game-changing automotive automatic transmission that can perform better than current ATs, DCTs, IVTs, CVTs and others. They are interested in licensing, product acquisition, contract... více
A Spanish Technological Center requests collaborations for the development of a foamed product obtained from styrene-butadiene-styrene (SBS) copolymers with zones of different density values. The Technological Centre is looking for a partner which... více
Bulgarian start-up company has experience in robotising micro and nano procedures in domain of cell injection. It is looking for new micro and nano manipulation processes applied in reproductive medicine. The partners sought could be industrial companies,... více
A Turkish company that is developing a novel biopsy method called E-cut biopsy is looking for expertise and knowledge in manufacturing of needles for medical applications. Ideally assistance is needed in development of a "needle with atravmatic hole" and... více
A Spanish Investors Group related to agro-food industry is looking for the know-how and equipment needed for producing high quality, 100% natural pomegranate juice. Initially, the plant processing capacity is fixed around 400000 L pomegranate juice per... více
A supplier of chemical additives is looking for (dual) NOx sensors. Such sensors will allow for finely tuned reduction of NOx after combustion. It is believed such sensors are about to appear on the European market. Commercial agreements with technical... více
A Polish company is specialized in manufacturing tools for food industry. The company has developed an exclusive and extended range of standard and special products and hand tools. The company wants to expand its product range with a stainless steel and... více
A Turkish company operating in textile industry (yarn production) with a ring spinning plant is looking for an eco-innovative solution to manage cotton processing wastes which are produced in high quantities.Currently cotton waste is burned in a rural... více
A large US company is looking for a compact, small volume, liquid burst generator that can be integrated into a small medical device. The system should generate liquid burst either on demand or with a tunable frequency. They are interested in product... více
New groundbreaking CVT (Continuously Variable Transmission) based on gearwheels, is a user and environmentally friendly automatic transmission type. It is used in vehicles and in passenger cars. The CVT selects the exact gear ratio needed in driving.... více
A UK SME wishes to develop a mesh interconnect for telecommunications/xSP (service provider) application using existing components in a novel implementation. The resulting implementation removes aggregated data switching used by star network topologies by... více
An East of England based Water Utilities companies seeks renewable energy solutions for energy generation to meet their current energy demand of around 877 Gwh/year. The company is keen to hear from CHP, Wind, Water based renewable energy sources, solar,... více
An Italian University proposes a project to design and build prototypes of innovative GlassBlocks (GB) with organic solar cells integrated to build translucent PV panels for façades and sustainable building envelopes. The improvement of GB's thermal and... více
A Spanish R&D Institute with a broad experience in Plasma Enhanced Chemical Vapour Deposition (PECVD) processes at lab scale is looking for a Plasma Enhanced Chemical Vapour Deposition (PECVD) based process at industrial scale. Collaboration in the... více
A large US company is looking for proposals for technologies, formulations and reagents that will prevent greasy dirt from accumulating on surfaces and fibers. They are interested in licensing, product acquisition, contract research, proof of concept... více
The global leader in the sporting goods industry, located in Herzogenaurach, Germany, has been part of the world of sports for more than 80 years offering a broad portfolio of products and delivering state-of-the-art sports footwear, apparel and... více
Czech university requests special equipment for centrifugal casting of reactive metals, alloys and inter-metallic compounds. Request comprises also delivery of accessories (optical pyrometer with integrated video module, displaying monitor, consumables... více
A multinational company active in the fast moving consumer goods sector looks for auxetic (i.e. that expand in all directions when pulled only in one) polymers and fabrics for consumer package goods applications. The company is interested in collaborating... více
A Spanish SME is looking for a firm to develop web analytics software to integrate its e-commerce smart integrated solutions suite, in order to incorporate a new solution that allows its customers to collect information about its users and how they... více
Large Danish producer and developer of toys today uses a specific punching tool for cutting membranes from tyres of different sizes. However, this solution is expensive and not very flexible. The company is interested in cooperation with a company who can... více
This project proposal comes from a Spanish SME that is going to submit a project for the development of a new methodology in order to provide an additional layer of security based on biometrics and, specifically, in face recognition mechanisms, making... více
A Canarian SME is developing a proposal for designing, building and testing a prototype buoy to provide offshore wireless communication services. The SME, acting as coordinator of the proposal, is looking for a SME specializing in marine and maritime... více
Medium sized company, located in the South Centre of Italy, designing and producing high quality equipments and machineries for ecological services and waste collectors is looking for partners for the production of their products. The searched partners... více
A Turkish company doing studies in medicine tracking is looking for a small, portable and integrable-to-pillbox data logger system for tracking the storage conditions of the medicine in the research centre. Data such as time, conditions of storage and... více
A UK company is seeking partners that can provide them with technologies for fast dissloving tablets and capsules. The offered technologies will be food grade', suitable for human consumption. License agreements or technical collaborations (for joint... více
A Spanish research centre searches partners for a project aimed to develop new thermoplastic pultruded profiles with improved mechanical properties for applications in passenger or goods transport vehicles. They look for several SME partners: engineering... více
A Spanish research centre searches partners to participate in a project aimed to develop green and safe childcare products (mainly prams, pushchairs, cots) to fulfil the needs of different groups of children. They should be pultrusion profiles producers... více
A Spanish technology centre, specialized in furniture, wood and packaging looks for partners to participate in a project aimed to interact with the manufacturing system suitable elements in order to provide or suggest autonomic responses to the changing... více
A Spanish research centre searches partners for a project aimed to develop composite materials based on renewable resources (physically modified polylactic acid (PLA) grades and colourless natural fibres) with improved thermal, mechanical properties and... více
A Spanish SME is looking for partners for a FP7-ICT-2012-8 project, in order to develop an intelligent security system based on the storage of logs, that offers a registration service and event management to guarantee chain of custody of digital evidence,... více
A French SME specialised in medical packaging has developed and patented a child-resistant and senior friendly packaging for medicine blisters. The packaging received the highest child protection level from a famous US laboratory. The SME is looking for a... více
A Spanish engineering company looks for a Small or Medium Size Enterprise for involving in a project focused on the development of a framework for supporting cost-effective cloud computing for intensive sensor utilization in cloud computing, that must... více
An Andalusian Technological Centre in the field of ceramic materials is looking for an industrial partner to be involved in a proposal in second stage phase to be submitted to FP7-ENV-2012 call. The company contribution will be the industrial testing of... více
An Israeli company developing Personal & Secured Portable Data Storage Device is looking to partner with: 1.A company that can develop and integrate a device combining biometric sensors with advanced microprocessor and large-scale flash memory and build... více
An Israeli innovator in infrastructure facility management is looking for a partner to shift a generic BI (monitoring and analyzing) solution for the infrastructure markets into an expert system. The adjustment should include a know how that will be... více
A large US company is looking for proposals for planarizing local nano-scale bumps and divots on a flat SiO2-based glass substrate without increasing its surface roughness. Planarization methods can be either polishing or filling. They are interested in... více
A large US company is looking for proposals for a transparent and highly heat resistant resin with low coefficients of linear expansion, similar to that of glass. They are interested in joint or contract development, material supply. The company is... více
A Yorkshire based University (UK) have developed software and a user interface to translate architectural plans into tactile maps to help blind and visually impaired people to navigate their surroundings. The university seeks a commercial partner for... více
A french SME is an agency specialising in the creation of interactive and innovative 3D applications dedicated to marketing and communications. In some of their projects, they need to modelize 3D objects to integrate them into their applications.They are... více
A long established Scottish company which manufactures high quality woollen products is looking for a means of automating the process of attaching swing tickets to tag locks ready for attachment to the finished product. They are seeking a collaborative... více
A German SME is looking for a partner for the development of an IT matching tool allowing to determine closeness of content between 2 profiles / projects. Linguistic methodologies of onthology and semantics should be integrated. In the next step, a... více
An Italian university research team working in the photovoltaic sector,and in particular in hybrid and organic solar energy, is seeking technologies concerning conductive connection materials for solar cell applications. The team is looking for equipment... více
An Austrian development office and vehicle prototype manufacturer is searching for partners offering know-how in the calculation and simulation of wood. Engineering tools and experience with other materials need to be applied to wooden structures in order... více
A French SME has developped an easy system based on an electrical method to assess corrosion progress of metallic structures.The aim of this system is to anticipate various works related to corrosion degradation phenomenon and so finally lead to decrease... více
An Israeli company developed original competitive technology for nanodiamond synthesis and introducing diamond nanoparticles within various media. The company is seeking industrial partners for collaboration in R&D projects in the field of nanodiamond... více
A SME in Sweden is looking for a new material with the following specification: A material that can be applied to approximately 5 µm of thickness minimum and that has low surface energy combined with mechanical strength. Further, the material shall... více
A large US company is looking for immediate supply of a transparent filter membrane for food applications. They are interested in supplier agreement to supply up to 476 million m² of membrane annually. The company has a food filtering application in... více
A Slovak institute has developed a new spin casting method. This method is a modern, fast, low cost alternative to injection moulding or pressure moulding. Represents fully proven tool for manufacturing prototype and/or functional components. The casting... více
Lithuanian company, specialising in the fields of construction is looking for a novel technology for production of concrente blocks used for fences. Company is looking for partners for cooperation. Lithuanian company, specialised in production of... více
An Israeli company a leader in local market in the field of hazardous waste management is looking to establish a Liquid hazardous waste incinerator in order to promote a local efficient BAT (best available technologies) solution. The company is looking... více
A large US company is looking for proposals for the development of an innovative system to collect and analyze big data gathered from consumer behaviors. They are interested in joint development, contract research, technology licensing, consulting... více
Czech engineering SME has developed patented equipment, which produces hot gas from biomass and other combustible substrates. Company looks for partner with financial resources or know-how for joint development of turbine which is capable to utilize... více
A large US company is looking for proposals for a variation of valve stroke and/or phasing for small combustion engines. Those engines are mainly based on a single cylinder Single Over Head Camshaft (SOHC) 4-stroke design. Passive solutions will be... více
A large US company is looking for development of a control system that can fill the torque hole during the upshift in a low-cost passenger car automated manual transmission (AMT) with a single shifting clutch. They are interested in licensing, product... více
The main field of the Hungarian company is research and software development. The company is good at software algorithm development, which uses modified version of artificial intelligent algorithms. The SME needs medical instrument, that is equipped... více
A Polish company is seeking technological partnership. Company has a ceramic combustion chamber technology fueled by biomass. Technology has full automatic control system connected with control panel of dryer and a heater for producing hot factor... více
A small Russian enterprise from Chelyabinsk specialized in development and implementation of energy-saving automated systems needs modernization of the intellectual remote control device for building illumination system. The company seeks partners for... více
A Polish company is seeking technological partnership. Company has a system of steam boilers, biomass, mainly straw, looking for partners who can help them in creating the technology of production of electricity and heat for low power. Also looking for... více
A small research company aimed at automation of buildings is looking for control ICT technology for energy efficiency building management. The objective is to contribute to a nationally funded Israel and Czech Republic project. The partner looked for... více
An innovative SME from Kaluga region develops and manufactures the equipment for physical-chemical purification and concentration of sugar-containing solutions. The company looks for manufacturers of components (sensors) for commercial agreements with... více
A French SME specialized in products for health, wellness and beauty treatment is developping several products from natural ingredients and high qualify organic. This SME is looking for European partners able to help it to develop its range of products:... více
A French SME, specialized in colour engineering, developed a universal colour quality control system allowing a much better control of all traditional and digital colour print and proof works. This new process is applicable to all printing technologies,... více
A large US company is looking for proposals for non-vacuum process for forming thin-film transparent electrodes with low electric resistance value and high light transmittance for use in solar cells. They are interested in licensing, joint/contract... více
A large US company is looking for proposals for smart materials or material system that respond to changes in temperature at a macroscopic level. They are interested in licensing, product acquisition, contract research, proof of concept leading to scale... více
A large US company is looking for proposals for applications that enable camera equipped mobile devices to measure and identify the surface features of small appliances. They are interested in product acquisition, contract research and development, joint... více
A small Czech company has developed and patented a low cost manufacturing process of TiO2 nanoparticles based on a modification of crystalline anatase. These nano-particles can be used in the production of photocatalytic products (sunscreens,... více
An Israeli manufacturer, world-leader supplier of OEMs (Original Equipments Manufacturers) in the field of high-precision laser cutting & welding and micro-machining, providing totally comprehensive engineering and manufacturing platforms to the medical... více
A Spanish SME specialized in Acoustics and Vibrations is looking for a partner in East Europe with wide experience in transformation and valorisation of pneumatic wastes from used tyres. The objective of this partnership is a joint design of the... více
A Polish company is seeking technological partnership for development and implementation of a parquet woodblock sorting line with the machine vision (MV) quality system. The company is a wooden floor producer (parquet and plank floors production, delivery... více
A leading Israeli manufacturer of electrical and complete solar water heating systems, with particular expertise with hot water tanks and solar collectors, is looking for a partner with engineering and planning services for installation of solar central... více
A consortium, coordinated by a Swedish research institute, including an Estonian university, Finnish, Estonian and Swedish SMEs, is looking for an industrial partner for a FP7 project on development of noise barriers to reduce noise from road traffic.... více
A Spanish technology centre looks for partners to participate in a proposal about applications of phase change materials to be presented to the call FP7-NMP-2012-SME-6 (topic: novel materials and design-based solutions for the creative industry). The... více
A Basque SME is building a consortium to carry out a project which aim is to unify, interconnect and pack services provided by several and different providers, consumed by tourism industry, on a public cloud. Several partners are sought for various roles... více
A German non-profit R&D company that focuses on XXL products, e. g. wind turbines, commercial airplanes, and ships, is due to set up a Eurostars project in order to improve the assembly of XXL products by means of an optical positioning system. They... více
A small Germany company is working with several universities in order to submit a project proposal in the area of the unconventional computation. They are looking for Academia partners (Research institutes, universities, etc) to complete the... více
An italian research institute specialized in greenhouse gas reuse is looking for a technology to store CO2 (carbon dioxide) produced by natural processes at a low pressure and a capacity of about 70 tonnes. The technology requested can either be at the... více
A Slovak designer has developed specialized innovative packages made of two-layer paper board that could be used for coffeehouses, restaurants or network of fast foods. The packages are environmentally friendly, very firm and easy to use. The designer is... více
A Dutch SME designs and manufactures implants that replace parts of the bone in the cranio maxillo facial region. The company is looking for better and more economic implant materials and manufacturing methods. Nowadays PEEK and Titanium are the materials... více
A French company is working to develop a new range of biodegradable products such as biodegradable slippers for hotels, which are eco-designed from raw materials of plant origin and thus respond to two imperatives: use of renewable materials and reducing... více
An SME from Western Poland, which manufactures metal elements for constructions and design, is searching for solutions to weld together elements made from brass and elements made from copper. The company is looking for partners Technical Co-operation,... více
A Hungarian research centre invites SMEs to the FP7 Research for the Benefit of SME program. The aim of the project is to develop a fast high-sensitive on-site detection method for Legionella, a disease that represents a significant problem in Europe. The... více
A Spanish research centre for wood, furniture and packaging industries, is looking for a European "wood based panel and parquet SME" to participate in the project. The overall objective of the project is to test a new eco-material, and develop its... více
A Spanish research centre seeks partners for a FP7 project aiming at the development of new functional and active nanoencapsulated materials to be used for a new-conception of therapeutic toys and children articles with a specific design that will... více
An Italian SME is looking for an alternative method to reduce the shrink wrapping process of the film around the product and the power consumption, achieving anyway the same speed and rapidity of the process. The company is interested in technical... více
A Dutch university wants to submit a proposal for the FP7-NMP.2012.2.2-1 call. The aim of the project is to develop one or more functional biomaterials for improved biocompatibility and long-term stability of degradable or non-degradable implants. They... více
A small Germany company is working with several universities in order to submit a project proposal in the area of the unconventional computation. They are looking for Academia partners (Research institutes, universities, etc) to complete the... více
Lithuanian company specialising in field of clothing is looking for a compact and innovative laboratory equipment for testing of clothes. It should be able test sewings, fabric and/or thread bobbins for hypoallergenic properties. Company seeks cooperation... více
A large US company is looking for proposals for alternative designs and/or materials for producing joint housings that are used to connect high voltage cables. They are to be installed directly in ground, tunnel systems and more and more in subsea... více
A large US company is looking for proposals for novel and cost effective wall insulation materials and/or installation methods that can be applied on existing houses. They are interested in supplier agreement, licensing agreement. The 2009 UK... více
A large US company is looking for proposals for the development of Nitrogen Oxides determination systems for diesel exhaust. They are interested in licensing, product acquisition, contract research, proof of concept leading to scale up to manufacturing,... více
A large US company is looking for proposals for hydrogen barrier coating with excellent adhesion to metal and high durability, for diaphragm seal pressure gages made of thin metal sheet that are used in plants where hydrogen gas is handled. They are... více
A Hungarian research centre invites gas turbine operators and maintenance SMEs to the FP7 Research for the Benefit of SME program. The aim is to develop an industrial grade IR sensor for the in-line monitoring of the thermal deterioration of the... více
A french university is looking for SMEs as partner of an ongoing european project. The aim of the accepted NMP-FP7 project is to explore the properties and possible applications of bismuth and bismuth based compounds when they are synthesized at the... více
Two Italian Universities and a Network of Italian SMEs seek SMEs Partners to develop a precision handling platform with bin picking of mechanical components that combines commercial anthropomorphic robots with smart handling systems guided by... více
A UK SME and research partner are submitting a proposal under the SME 2012 call. The project aims to create opportunities for SMEs in the production of made-to-order and made-to-measure clothing. The project integrates advanced technologies to allow... více
Large Danish producer and developer of toys is looking for actors who can technically solve the problem that digital inkjet cannot print on curved (2.5D) and double curved (3D) items. The company has experienced that digital inkjet cannot print on... více
A Turkish company, specialized in hazardous waste incineration, has completed a technical study and a feasibility study to construct and operate a hazardous waste incineration plant. The company is looking for suitable partners who could provide a new... více
A UK SME has embarked on the development of new heat management system based on nanofluid coolants. The company's main area of specialism is in the design and manufacture of bespoke heat management solutions for its clients. As part of its new product... více
A company of northern France is looking for a manufacturer of electric motors for propulsion of vessels, for powering an eco-designed floating showroom, which could move independently on streams / harbour areas. A company of northern France is looking... více
A French company providing CRM - ERP systems, is looking for competences on a collaborative R/D project under ICT call SME 2012. It aims to develop a new communication solution for customer and social management and integrating components featuring... více
A Dutch company is looking for partners for development and manufacturing of a modular bridge design which is made of standardized pultrusion GRP (glass fibre reinforced) profiles and panels. The design needs to be suitable for assembling various bridge... více
A energy research company in Sweden is currently working on a forest residue project measuring moisture in chipped forest residues. One of the main objectives is to evaluate and present options in both online measurements of chipped forest residues... více
A UK company, which uses Glass Reinforced Polyester (GRP) in the manufacture of its products, is seeking ways of recycling GRP in order to minimise waste and develop new products. The company is looking for industrial partners to collaborate in the... více
A Spanish Research Center is looking for partners for a project focus on the design of a tool that allows to optimize textile productive processes and the integration in both simulation tools and production systems. This ICT (Information and Communication... více
A UK research centre is working on a FP7 proposal in order to develop a new process model that can predict the cutting forces and vibrations for the micro-milling. Mechanics and dynamics of micro-milling process will be formulated and the model results... více
An Italian research center is looking for some end users (water utilities, bottled water and food industries&) to join a sound team of academia-enterprise partners in a FP7 proposal on water security. The end users should give advice on the technology... více
A large US company is looking for development partners for patterning, based on chemical-processings, Carbon Nanotube (CNT) films formed on Poly Ethylene Terephtalate (PET) substrates. They are interested in joint development, development contract,... více
A UK based SME active in the security sector is interested in technical cooperation with materials manufacturers to develop and/or incorporate intelligent impact resistant materials in applications such as helmets and limb protectors. A UK SME which... více
A German university is looking for an industrial partner with expertise in Raman spectroscopy and sensing application for a FP7 proposal. Objective of the project is to introduce a novel approach for the lithograghy-free formation of Substrates for... více
A UK company using a continuous moulding process to manufacture in-plane Glass Reinforced Polyester (GRP) rooflights (skylights) for industrial buildings, seeks assistance in meeting the requirements of BS 476 Part 7 Class 1, either by the addition of... více
A large US company is looking for proposals for the conversion of a prototype fused ceramic-platinum oxygen sensor to large scale production. They are interested in licensing, product acquisition, contract research, proof of concept leading to scale up... více
A Slovak SME active in the field of plastic processing requests specialized baling compactor for compression molding of waste foils, cartons and binding wires. The cooperation should be based on the license agreement with technological assistance. The... více
A large US company is looking for proposals for new chemical basis for tackifying resin for polyolefin or styrenic block copolymer based hot melt adhesives. The current shortage of hydrocarbon based tackifying resins has created an opportunity for... více
A large US company is looking for proposals for the rapid determination of the thickness of a transparent protective coating. They are interested in licensing, product acquisition, contract research, proof of concept leading to scale up to manufacturing,... více
A consortium being led by an East of England based research institute is looking for a Robotics SME for an FP7 Research for SMEs project. The objective of the project is to develop rapid, advanced non-destructive testing (NDT) techniques for mapping... více
A large US company is looking for proposals for an innovative material that can completely coat a hot and viscous food product. After cooling, the applied coating product is easily peeled from the solidified food. They are interested in supplier... více
A European consortium is looking for industrial SMEs for an FP7 project. The objectives of the project are to synthesize novel halogen-free, FR materials, and manufacture relevant prototype components (textiles, composite items, cables, etc). Sought SMEs... více
A Spanish Technological Center is carrying out a project which aims to research and develop in-memory database caches to support Business Intelligence applications, oriented to cloud or local databases. The Center is looking for non Spanish SME's and RTD... více
A south west UK SME has developed innovative waste recycling plant equipment. They now seek a collaboration with a supplier and developer of Pyrolysis plant equipment to explore the development of a combination plant with glass recycling equipment. The... více
A Scottish university is part of a consortium of academic organisations, SMEs and large food companies, developing a project which aims to address health issues by evaluating novel, local bioactive ingredients in marketable food products. They seek:... více
A French SME has created a complete and easy-to-install software system assessing all energy consumptions of buildings (water, fuel, gaz, electricity...) with an accuracy per hour. Willing to extend their activities through Europe, they are searching... více
A French company, specialized in the treatment and the recycling of industrial oils, is searching a ready-to-use solution enabling to treat these oils while especially removing water and residual particles. That solution has to reach a total daily... více
Polish company from the food industry is seeking a producer of a ready filling of a blancmange type, resistant to the baking, packed into bags (e.g. doy-pack). A producer is searched with the technical capacities for packing the product in aseptic... více
The institute of knowledge based systems and knowledge management of a German university plans to submit an application to call FP7 ICT-2011.4.4 Intelligent Information Management. The main goal of this project is to fill the gaps between analytics of... více
A Spanish engineering company in the field of construction, both buildings and infrastructures (roads, railways, ports, airports and hydraulic works) looks for entities for involving in a project which deals with the design of a novel transport... více
A French SME is acting as project coordinator for a proposal that will be submitted to the 2012 Research for the benefit of SME call. The proposal is related to the control of the entire manufacturing process of welded molding tools. The proposed project... více
A large US company is looking for proposals for the supply of a reliable, small and low cost near infrared source that is suitable for automotive use. They are interested in supplier agreement, licensing, proof of concept leading to scale up to... více
A large US company is looking for proposals for viscous liquid dispensers that can apply a uniform-thickness coating on convex-shaped micro-structures. They are interested In equipment supply, development contract and licensing. The company seeks... více
A Spanish Basque Company seeks a medical device manufacturing know-how, related to catheters, balloon catheters, tubes, made of silicon and plastic, or similar type products. The company is interested in a know-how acquisition and has investment... více
A small Finnish company is looking for a plastic pipe manufacturer. The company has developed a novel geothermal heat collector pipe and is focused on installations and projects with the pipe. The company wants to find a manufacturer with efficient... více
A Spanish R&D Institute with a broad experience in Plasma Enhanced Chemical Vapour Deposition (PECVD) processes at lab scale is looking for a Plasma Enhanced Chemical Vapour Deposition (PECVD) based process at industrial scale. Collaboration in the... více
A Spanish Technological Center based in Catalonia working in the construction sector is looking for innovative thermal insulation materials potentially integrable in constructive solutions with high degree of industrialization. They are interested in a... více
A Spanish Technological centre working in the construction sector is looking for construction materials based on photovoltaic or photovoltaic materials with potential integration into or as building elements, to be integrated in constructive solutions.... více
A Spanish IT services SME looks for a partner with expertise in Building Automation and HVAC (Heat Ventilation and Air Conditioning) Systems to join a reload proposal for the current call of the Eurostars programme. The project goal is to apply advanced... více
One Italian University and a Network of Italian SMEs seeks SMEs Partners for a Capacities Project to develop a ready-to-commercial production of a new technology for the mechanical recycling of not hazardous Autovehicle Shredded Residues (Car Fluff). The... více
Two Italian Universities and a Network of Italian SMEs seek SMEs Partners to develop a precision handling platform with bin picking of mechanical components that combines commercial anthropomorphic robots with smart handling systems guided by... více
A French enterprise, specialized in embedded flexible electronics in any powered devices especially ISO card, is looking for partners able to develop thin flexible batteries. This product requested will be used to power some electronics embedded in smart... více
A large US company is looking for partners who can prototype and produce parts from new, alternative materials to replace a metal part. They are interested in licensing, joint development and supplier agreement. The company is exploring new product... více
A large US company is looking for proposals for joint development partners to create transparent flexible materials with low thermal expansion. They are interested in licensing, joint/contract development. Country: Luxembourg Type: REQUEST Date:... více
A large US company is looking for proposals for viscous liquid dispensers that can apply a uniform-thickness coating on convex-shaped micro-structures. They are interested In equipment supply, development contract and licensing. The company seeks... více
A large US company is looking for proposals for a material to make an exterior siding product with the appearance of clapboards. They are interested in licensing, product acquisition, contract research, proof of concept leading to scale up to... více
A UK SME has embarked on the development of new heat management systems based on nanofluid coolants. The company's main area of specialism is in the design and manufacture of bespoke heat management solutions for its clients. As part of its new product... více
A UK company seeks a partner with food science expertise to join a small consortium for a Eurostars project with the goal of developing a novel packaging material based on moulded paper that will control the moisture vapour transmission rate in fresh... více
A US multi-billion dollar food manufacturer, invites proposals for highly-durable ultra-water-repellent surface treatments for food and beverage processing equipment. Of interest are not only coatings but also surface modification or patterning. Proposers... více
A US multi-billion dollar food manufacturer, invites proposals for highly-durable ultra-water-repellent surface treatments for food and beverage processing equipment. Of interest are not only coatings but also surface modification or patterning. Proposers... více
A US global tool manufacturer, invites proposals for materials or composites with high rigidity, strength, and damping performance, to be used for shanks (shafts) of internal cutting tools. Damping performance improvements relate to the material's ability... více
A UK company is seeking several non-UK partners to join a small consortium for a collaborative project to develop and refine a novel technology to support intuitive and safe inspection of suspect packages and potential safety hazards by x-ray... více
A UK company is seeking a partner with expertise in virtual reality software and human machine interface technology to join a small consortium for a Eurostars project proposal with the objective of developing and refining a new technology to support a... více
Engineering and supplying company, operating in the area of equipment for chemical, petrochemical and energy industry (with special interest in nuclear power plants) is looking for potential partners active in the area of designing and manufacturing of... více
A French company is looking for a textile made of natural fibers to replace PVC (polyvinyl chloride) that can be used outdoor. The company is interested in technical cooperation or commercial agreements with technical assistance with industrial or... více
A large US company is looking for proposals for joint development partners to create transparent flexible materials with low thermal expansion. They are interested in licensing, joint/contract development. Transparent flexible materials with low... více
A Turkish SME, experienced in Sheet Molding Compound (SMC) and Bulk Molding Compound (BMC) is looking for an automation system to be applied to its BMC/SMC production line. The company is open to commercial agreement with technical assistance... více
A German research institute is looking for SME partners to cooperate in a consortium of an EU funded project. The project aims to generate 3d structures with a new arc based additive manufacturing process. The institute is looking for partners in the part... více
A Greek company is searching for partners to participate jointly in the preparation of a project proposal entitled CROWD4UM.The project aims to deliver a technological and operational framework for enabling citizens collect environmental data, transmit... více
A UK SME is seeking a partner with graphical user interface design expertise to join a Eurostars project proposal. The aim of the project is to develop a new enhanced e-learning software which will incorporate software tools and processes for comparison... více
A UK company is acting as project coordinator for a proposal that will be submitted in the call area FOF.NMP.2012.-4: High-performance manufacturing technologies in terms of efficiency, robustness and accuracy. The proposal is related to the... více
A Greek SME active in the field of environmental engineering is looking for a partner for an FP7 proposal to be submitted. The proposal will be submitted under the Environment scheme of the Collaboration activity of the FP7. The expertise sought is for... více
A UK based research centre seeks partners for a project under the 2012 FP7 KBBE call aiming to refine and integrate sensing, handling and packaging technologies towards producing hygienic automated packaging systems for the food sector. Both academic and... více
A German University is looking for SMEs active in IaaS (Internet as a Service) and SaaS (Software as a Service) in order to create a consortium and submit a proposal under the FP7-ICT-2011.1.4 Trustworthy ICT, call FP7-ICT-2011-8. The objective of the... více
This UK-lead Eurostars project investigates application of the cloud delivery model, and addresses fundamental issues of data security, privacy, and standards. The UK lead currently provides components to build secure systems with strong authentication,... více
A German university-led consortium seeks SME partners to develop a new resource-efficient method of biogas treatment to achieve natural gas by means of bottom ash from waaste incineration within an FP7 Environment project. The partners should be active in... více
A Hungarian research centre intending to submit a proposal to the FP7 Research for the benefit of SMEs call is inviting partners to develop a new low cost, user-friendly, fully automatic microwave rain gauge system for low range applications that would be... více
An FP7 project being developed by an East of England research centre requires a number of partners to complete the consortium. The project aims to develop a condition monitoring system for failure investigation in fairground machinery and structures and... více
An East of England based research centre requires one large company and two SMEs to complete the consortium for their project which is due to be submitted to the Research for SMEs call in December. The aim of the project is to develop a condition... více
A European consortium covering three countries and coordinated by a French company involved in CCTV video images interpretation is looking for integrators of large management and surveillance systems in public transports & cities. On its side, the French... více
A German research group has developed various processes for generating micro geometries. Two major processes are Jet Electrochemical Machining (Jet-ECM) and micro impact extrusion. The group wants to submit a proposal within the next FP7-FoF-NMP call... více
A German R&D service centre specialised in surface engineering and thin films is pooling competencies in the areas: thin film deposition, coating application, film characterization and surface analysis. The research institute is searching for partners... více
An Andalusian Research group is looking for companies and research centres from the electronic and photovoltaic fields willing to joint as partners to a Consortium to take part in the current FP7 Energy call. The overall objective of the project is to... více
A Turkish company specialized in rubber stamp and other manufacture of plastic products for different purposes is looking for laser marking system. System should already be on the market. The company is interested in a commercial agreement with technical... více
A Turkish company experienced in research and development on pipeline technologies, energy production and management, advanced materials, fluid transportation subjects, computational modeling and analysis is preparing a project proposal to EUREKA. The... více
A European consortium covering three countries and coordinated by a French company is looking for SMEs involved in CCTV video images interpretation in order to detect events that would be relevant for security & safety. The company is looking for partners... více
A Spanish company is looking for European partners (not Spanish) for a FP7 research project which objective is to develop an innovative mobile system for gathering information about the state of pollution, noise and driving-efficiency in municipalities.... více
A Spanish research centre searches partners for a project aimed to develop composite materials based on renewable resources (physically modified polylactic acid (PLA) grades and colourless natural fibres) with improved thermal, mechanical properties and... více
A Spanish technology centre, specialized in furniture, wood and packaging looks for partners to participate in a project aimed to interact with the manufacturing system suitable elements in order to provide or suggest autonomic responses to the changing... více
An Italian SME operating in the area of electro-mechanical compressor accessories is preparing a proposal. The project will establish news standards for refrigerators and freezers compressors management and accessories. It will replace several current... více
A multinational company based in the South-East of England is looking for novel materials for use as sealants between metal caps and glass jars, replacing the current PVC-type material. The material should be compatible for use with the present process... více
A UK based company providing CAD, CAM, and CMM services (Computer Aided Design, Compuer Aided Manufacturing and Cooridinate Measuring Machine) is looking for a low cost EU based partner to provide it with an outsource capability for its projects. This... více
A Polish SME managing a biogas-fueled power plant is looking for RTD performers, SMEs involved in biogas production and utilization for collaboration in the project within 7th Framework Programme, Capacities: Research for SMEs action. The partners are... více
A multinational active in the consumer goods sector looks for proposals and/or partners to extend and improve the understanding of gas generation in the zinc anode of alkaline batteries and to develop methods to mitigate the phenomenon. The zinc /... více
A multinational active in the consumer goods sector looks for polymer based solutions for long wearing color and superior feel in cosmetic products (face, lips or eyes long wear formulations). Belgian company is open to various types of partnerships... více
A multinational active in the consumer goods sector looks for polymer based solutions for long wearing color and superior feel in cosmetic products (face, lips or eyes long wear formulations). Belgian company is open to various types of partnerships... více
A US global manufacturing company, has an urgent need to identify partners that can create micron-scaled designs with high resolution and accuracy. Indication of interest should include examples of current micro-patterning capabilities and your ability... více
A German SME active in the development and production of equipment for the energy production from biomass and other renewable sources has developed a device for the gasification of biomass. The SME is searching for a partner who delivers a solution for... více
A Czech SME has developed low-pressure casting machine for manufacturing of aluminium and its alloy castings. The advantage of this casting method is usage of 95 % aluminium alloy during the casting process and high level of automation. The company is... více
A Turkish company active in electronics market has been working on an innovative solar junction box (j-box) set to be used for combining photovoltaic panels. Partners are sought for this on-going project for further development and implementation phases.... více
A French clean-tech oriented company which activity is based on Combined Heat, Cooling, Power (CHCP) and Desalination innovative solutions is looking for a Multi Effect Distillation desalination process for Trigeneration energy applications. The company... více
A large US company is looking for proposals to aid in the development of methods to assess the quality of battery cells throughout their manufacturing process and after they are manufactured. They are interested in licensing, contract research, proof of... více
A Swiss Company is looking, on behalf of its customers, for innovative Solid State Lighting (SSL) solutions or components. We are interested by innovative LEDs lighting power electronics, innovative LEDs lighting lenses systems and complete LEDs Lighting... více
UK based developer of high integrity safety critical embedded software is looking for a low cost EU based partner to help meet its project peaks. The partner will need to have extensive experience of developing or testing software applications to... více
A large US company is looking for proposals for creating high density arrays of ultra small electronic-scanning ultrasonic transducers. These transducers will be incorporated onto a cylindrical medical device to enable high resolution imaging. They are... více
A Turkish firm looks for a consulting firm which could train about constant velocity joint (CVJ) manufacturing by using Cold Forming method. There can be a consultant per different field such as forging operation. A Turkish firm looks for a consulting... více
A Dutch SME is specialized in the development and production of packaging machines. The company is looking for expertise to develop a new special cutting system with an improved tool life of the knives for the fast cutting of free shrinking polyethyleen... více
A Korean SME is looking for non-welding forming technology through extrusion that forming a cylindrical shape with multi level processing. Manufacturing Agreement for process, installation, facilities and Commercial Agreement for engineering and... více
A Spanish company is looking for a partner for a Eurostars project with the main objective of developing a Personal Learning Environment, able to filter, classify, add and integrate educational contents and resources currently available in the web in... více
An Austrian university is acting as project coordinator for a proposal which will be submitted in the call: FP7-NMP-2011 Nanosciences, Nanotechnologies, Materials and new Production Technologies. The proposal is related to the development of new... více
A Polish company, specialized in advanced communication and selling skills, is looking for a technology partner to build advanced selling skills into artificial intelligence of virtual person (avatar). Jointly developed technology is going to be offered... více
Lithuanian company seeks an innovative color printer that can be used for the printing of permanent colors for decoration on ready-made clothes made of different fabrics. Company is looking for cooperation with technical assistance. Lithuanian company... více
An Italian company is looking for engineering partners who would be interested in developing a technology related to domestic space heating based up on MicroCHP devices, geothermal heat pump and hybrid solution comprising condensing boiler and using... více
A multinational active in the consumer goods sector looks for simple and inexpensive analytical technique(s) to identify fecal odors, as a low-cost alternative to the well established but complex and expensive currently used methods. Belgian company is... více
A Brussels-based multinational company active in the consumer goods sector wishes to identify suppliers and technology enablers for increasing the production rates of deep-draw, closed-end metal cylinders(cans).Partners with existing knowledge,... více
A French clean-tech oriented company which activity is based on Combined Heat, Cooling, Power (CHCP) and Desalination innovative solutions is looking for a Multi Effect Distillation desalination process for Trigeneration energy applications. The company... více
A company from central Poland, that is dealing with manufacturing, importing and wholesale deliveries of wall and floor tiles is looking for machines and know-how allowing the production of innovative products from rubber granulate to improve their... více
An Irish SME, is looking for gas transferring membranes and possibly modules, for a specific application in the Environmental industry. Both hollow fibre and flatsheet membranes would be suitable, but not spiral wound. The membranes material must be... více
A Hungarian research centre intending to submit a proposal to the FP7 Research for the benefit of SMEs, inviting partners to develop an efficient on-site remediation technology for the elimination of soil contaminants, especially chlorinated... více
A Hungarian research centre intending to submit a proposal to the FP7 Research for the benefit of SMEs/SME Ags call (FP7-SME-2011-BSG) is inviting partners to develop a new low cost, user-friendly, fully automatic microwave rain gauge system for low... více
A public Portuguese University has developed a new process for encapsulating luminescent aluminates, which can be used in materials for self-cleaning hygienic surfaces, in the domain of constructive systems, biomedical systems, aquatic or high humidity... více
A university from Germany developed a novel process and device which allows the production of long, natural or other fibre agglomerates suitable for the manufacturing of fibre-reinforced plastic mouldings with a high-quality structure. Presently, the... více
A Dutch SME has developed a novel freeze-drying concept. By increaseing the active surface area, keeping the product in the same vial from beginning to end and a modular approach for each process step, several problems and bottlenecks of the traditional... více
A Slovak research, development, design and supply company has developed a special automatic vehicle with robotic control. Main advantages of the mentioned vehicle is its variability depending on the particular construction and type of superstructure: the... více
A team of Polish researchers developed a very unique method of producing fibrous composite materials in form of fibres and sponges. Modification of chitosan, alginate and cellulose fiber materials by feather keratin is a novelty. All these materials... více
A start up company based in North-Eastern Italy, working in energy sector is looking for partners in order to characterize solar grade silicon obtained by an innovative process starting from biomass for photovoltaics applications. silicon wafer... více
A large US company is looking for proposals for an innovative material that can completely coat a hot and viscous food product. After cooling, the applied coating product is easily peeled from the solidified food. They are interested in supplier... více
French company specialized in interactive terminals, software and information screens is looking for public or private partners working on codec and software techniques to build a consortium for a EUROSTARS project. The company wants to develop a new... více
A French company, specialized in process engineering for waste recycling, is searching a solution for the gypsum plaster treatment. The expected technology has to include gypsum board separation and monomatter upgrading. The process sought is ideally... více
A French engineering company, specialized in industrial waste recycling processes, is searching a ready-to-use RFID-based tool (Radio-frequency identification) for the marking of waste. Easy to implement and integrate into the matters; the aim is to... více
A Dutch company, specialized in the production and marketing of oils rich in essential fatty acids, is looking for a partner that has the expertise and production facilities to develop stable food grade emulsions of essential fatty acids. The company is... více
A Swiss company has developed redox anode-supported thin electrolyte cell and is now looking for a ceramic manufacturer to produce the cells in volume to answer the next years coming market of solid oxide fuel cell. The ceramic manufacturer would screen... více
A company based in Luxembourg, active in the field of package printing, is looking for an industrial partner with a state-of-the-art technology in low sensory narrow web foil flexography printing; if possible intense flexo for the food and even... více
A large US company is looking for novel, edible biopolymers that produce low viscosity aqueous dispersions/solutions at high concentrations, and are suitable for commercial scale use. They are interested in licensing, product acquisition, joint... více
A large US company is looking for research partners and collaborators who can help them to develop a process to color garments assembled from dissimilar materials. The end result they seek is a garment that has uniform, solid color over the entire... více
A Turkish company working on pipeline technologies, energy production and management, advanced materials, computational modeling and analysis fields in addition to fluid transportation subjects is preparing a project proposal to EUREKA ACQUEAU 4 call.... více
A Spanish SME specialized in Acoustics and Vibrations is looking for a partner in East Europe with wide experience in transformation and valorisation of pneumatic wastes from used tyres. The objective of this partnership is a joint design of the... více
A consortium, being developed by an East of England based SME is looking for multiple partners to join and potentially lead an FP7 project being submitted to the FP7-AAT-2012-RTD-1 call. The objective is to employ a physics-based' virtual engineering'... více
A Turkish company experienced in research and development on pipeline technologies, energy production and management, advanced materials, fluid transportation subjects, computational modeling and analysis is preparing a project proposal to ACQUEAU 4... více
A Turkish research and development performing company, on pipeline technologies, energy production and management, advanced materials, computational modeling and analysis fields in addition to fluid transportation subjects, is preparing a project... více
A Romanian institute is developing research activities in the field of materials science, raw mineral resources, wastes recycling, environment protection and sustainable development. Companies, R&D entities, academics are sought for technical... více
A German company, developer of a highly effective and eco-friendly technology for electrolytic water disinfection is searching for partners for a project proposal in the 2011 call in eco-Innovation / priority "Water". The prototype of the company's... více
Within the frame of the CIP Eco-innovation Programme a German company is seeking partners for a project concerning the development and construction of technically simple but robust systems for converting waste oils to base oils by an already tested and... více
A French research organization specialized in agriculture for development is preparing a proposal in response of a next call for tender as part of the 7th Framework Program of the European Commission - Theme 2 (Food, Agriculture and Fisheries, and... více
A Spanish SME, main producer of water-soluble and biodegradable plastics, has developed a production process by which it is possible to obtain pellets of this material that can be used for the manufacturing of different products by using an injection... více
A Spanish research centre from the plastics sector has developed an innovative processing method for production of natural long-fibre filled polypropylene sheets. The obtained sheets, which are very interesting due to their biodegradable nature &... více
A French research SME develops and carries out innovative computer solutions to generate highly unsuspected qualitative and quantitative gains on complex real life processes. It is looking for partners in industry or service sector who deals with complex... více
A German SME operating in the treatment of water and waste water is looking for any kind of conductive non-stick coating for metal surfaces. They are looking for a joint further development, testing of new applications, or adaptation to specific... více
An Andalusian SME of the sector of the consultancy services, specialized in the implementation of cooperation networks, is looking for SMEs from all over the EU to take part in a research project focused on the socio-economic field. The aim of the... více
A large US company is looking for proposals to aid in the development of a compact linear alternator to be integrated into an opposed free-piston engine. The client is looking for designs for a linear alternator and rectifier which are optimized for... více
A SME from Tomsk specializing in LED light source development and manufacture is searching for manufacturer/developer of radiators for LED lamps of irregular shape that specializes in precision molding (under pressure) of aluminium alloys, extrusion,... více
A Scottish brewery which is establishing its own bottling plant is seeking a biodegradable shrink wrap for use in packaging its 500ml bottles in packs of 12. An established Scotttish brewery is seeking a biodegradable shrink wrap for wrapping its... více
Spanish company, which designs and produces a robotic bird for bird strike avoiding and bird presence avoiding system, is looking for technological partner who can improve the robot with a UAV system and applications which may widen the market... více
A Spanish company of the sector of the photovoltaic energy has developed solar trackers based on the system of rolling platforms. The principal advantages of these models are their capacity (200 and 274 m ² of panels), the great stability and... více
An Italian SME operating in the fields of software, supervision and control systems for water, gas and petrochemical industries, is looking for technical partnership on hydroinformatics, SCADA (Supervisory Control and Data Acquisition) systems & knowledge... více
An Italian company acting in the sector of fuel cell systems for mission-critical backup power applications is looking for a metal sheet to be used as an electrode for alkaline cells. The peculiarity of the electrode is that it has to be of two different... více
A small R&D company based in the South East of England is looking for technical partners and/or investment to further develop vehicle collision avoidance system. Potential joint development partners can be from either academia or industry, with experience... více
A University from Northern Germany has developed a measuring unit for the measurement of movements especially in rotor and linear machines. The novel unit is embedded in a film material placed in the air gap between the stator and the rotor of... více
An Israeli entrepreneur, an expert for waste management, is interested in transferring the knowhow for production of low speed size reduction machines for incinerating and recycling and connected planning for handling a multitude of used but also new... více
An Austrian company active in the field of monitoring and cleaning water network systems has developed a pipe(line) purification and regeneration system which operates by means of cooled oil-free breathing air. Different materials and deposits can be... více
An Andalusian Technological Centre has developed an innovative Enterprise Resource Planning system (ERP) adapted to the Textile Sector. An ERP is an information management system that integrates and automates a lot of business practices associated to... více
A consortium led by an East of England based organisation requires an Association from the field of non-destructive testing, materials, construction or marine/offshore energy sectors for an FP7 Research for SME Associations project. The aim of the project... více
A German Research Institute is initiating a project in the programme CLIENT (International partnerships for sustainable climate protection and environmental technology). Objectives of the proposal are new technological approaches in energetic urban and... více
A Spanish organization for the food industry is seeking companies or research groups with technologies related to the production of biopolymers from agroindustrial wastes applicable to the development of biobased plastics that can be used in food... více
Polish company producer of alcoholic beverages, wines and fruit concentrates is looking for new recipes of alcoholic products on the basis of fruits (alc. content 6-24%). The company is interested in colaboration on the basis of technical cooperation... více
A French cluster working with Sitka Spruce in the forest and timber industries is notably interested in exchanging experiences with Irish, Scottish or Danish companies about the construction products made of Sitka, technologies and transformation process... více
An Andalusian SME with experience in Virtual worlds and Multimedia is currently preparing a proposal to be submitted within FP7-ICT Call 8. The project aims to develop a virtual tutor which will live in a virtual world and will be able to automatically... více
An Italian SME has set up an innovative technology for active insulation and solar gain in buildings and is looking for partners for a R&D and demonstration project aimed at innovating light prefabricated walls and cladding panels to be used in Nearly... více
A Spanish research centre seeks partners for a project aimed to design and develop new formulations based on almond shell filled thermoplastic, processed by extrusion and injection moulding. These compounds will be tested and their production process... více
A Spanish leader in mineral water is looking for pouches for packing bag-in-box products and transport of liquids in general. Within the commitment of reaching new markets they would like create new lines of production. The partner should provide not only... více
A Norwegian SME has developed a novel intervention system for oil- and gas wells. The novel method is based on pushing a semi-stiff and spoolable carbon "rod" into live wellbores. So far this novel method has been applied successfully. However, the... více
A Russian SME, specialized in turbomachinery design, developed a fundamentally new kind of impeller related to fan engineering. Application of a new engineering solution enables a 70% increase in the specific aerohydrodynamic loading of turbomachines with... více
A UK company manufacturing hot water boilers, steam boilers and waste heat boilers is looking for innovative chain grate stoker solutions for burning wood pellets, wood chip or food waste such as oat or wheat husks. The solution should be able to be... více
A small research company aimed at forming material R&D is looking for a technology in order to enhance lifetime and wear resistance of dies by the applying of new tool steels which have been developed by the company and new heat treatment procedures... více
Small company from south-east Poland is requesting a technology line for cars and lorries diagnostics. The technology should be tested and ready for demonstration. Company is seeking commercial agreement with technical consultancy. To expand the... více
The company from South-East Poland, dealing with wide-range window production, is requesting for technology for PVC profile processing used for custom-made windows. Sought technology should improve quality, speed and reduce human mistakes in the... více
A branch of a company in Poland (Lower Silesia) active in the field of automotive component manufacturing seeks a partner which can design and perform a pneumatic hose coupling tightness test. The main goal is a functional test of the rubber seal in... více
A Czech company produces top-class plant booster concentrate which, thanks to a proprietary technology, contains stably around 90 % of fully soluble humic substances (low-molecular part participates with 50%). The booster can work on its own or it may... více
A small Romanian company developed an electro-kinetic converter that transforms, in the atmospheric environment, electric energy into kinetic energy without mobile mechanical means, this converter being useful for any purpose that implies the displacement... více
A Spanish Technological Center is looking for a technology for getting nano-sized organoclay sepiolite. They would carry out the preparation of organoclay nanocomposites adding sepiolite to certain plastics to improve their characteristics. The Center is... více
A small Czech company has developed and patented a smart and highly efficiency air cleaner based on the principle of a photo-catalytic effect with water suspensions of the photocatalytic titanium dioxide and inorganic binders. The photocatalytic coating... více
An Italian research laboratory specialised in the study of microwave technologies for industrial applications has developed and patented a novel type of chemical reactor excited with microwave power, utilising microwave immersion antennas. Development... více
A Dutch company is specialized in manufacturing of garden tools and tools for agricultural/ horticultural applications. The company has developed an exclusive and extended range of standard and special products and hand tools. All products are available... více
A North West region of the United Kingdom University has developed a novel hardware and software system making a user's keyboard, screen and desk into a single input/output device and is seeking a partner to take to market under license embedded in... více
A large US company is looking for a novel suspension system that enables ceiling mounted equipment to be easily and accurately repositioned. They are interested in proof of concept leafing to scale up to manufacturing, joint development, potential... více
A large US company is looking for proposals for innovative drive systems that can provide user-controlled transport for light loads using rechargeable or renewable power sources. They are interested in licensing, product acquisition, contract research,... více
An online nondestructive camera for quality inspection of concrete in old buildings. (11 GR 49R2 3LFX) A Greek real estate agency active in restructuring and refurbishing old traditional houses is looking for an on-line non destructive inspection control... více
A French cluster working with Sitka Spruce in the forest and timber industries is notably interested in exchanging experiences with Irish, Scottish or Danish companies about the construction products made of Sitka, technologies and transformation process... více
A French SME is looking for a supplier of a material that can be transformed by extrusion to a soft film (thickness from 10 or 15 to 50 microns) and solvable in water at temperature ranges from 10°C to 45°C and from 45°C to 90°C. The product should be... více
A Turkish company is looking for a novel radar and photocell technology to be employed in doors. Preferably, technology shall be already on the market. Company is looking for a manufacturing agreement. Photocells are sensors of light or other... více
A German company which is one of the leading nanotechnology companies in the world, developing innovative ceramic products such as filtration systems and coatings for large industrial customers seeks technical cooperation or partners for development... více
A Polish company is looking for a simulation technology of mechanical systems in construction of agriculture machinery frames. Technology should enable designing and testing of realistic virtual prototypes of agriculture machines as well visual as... více
A Polish SME from telecommunication services sector is looking for new solutions/equipment in the domain of optical fiber exploitation especially in FTTx networks. The requested technology should be in advanced state of development or ready for the... více
A Polish company active in the production of laminated wood industry intends to expand its production of new products. The company is looking for technology of furniture production from honeycomb board that will allow to produce small - scale series for... více
A Danish recycling company who processes recycled materials into saleable and marketable products is looking for a provider of a technology which can handle LCD screens and plasma screens. The company is interested in a license agreement and/or... více
An andalusian aeronautical association specialised in act as framework of the "cluster" Andalusian sector and providing support to the subsidiary companies of the sector and the relationship withs other institutions, associations and foundations is very... více
A Korean company is looking for business partners who can provide a general technology / consulting regarding Unmanned Aircraft Systems (UAS) for reconnaissance and surveillance radar systems. The company is interested in commercial agreement with... více
A French company specialized in design and manufacturing of hydraulic and pneumatic components is looking for a material for bushing part of connectors. The bushing will be assembled to a removable connectors and assure the fixation of a pipe under... více
An italian research institute specialized in greenhouse gas reuse is looking for a technology to store CO2 (carbon dioxide) produced by natural processes at a low pressure and a capacity of about 70 tonnes. The technology requested can either be at the... více
A German SME, with main activity in the treatment of sludge oils, used oils, oil/water-emulsions and oily water has developed a new technology for the treatment of used oils / sludge oils by means of a special designed ultrasonic treatment system with... více
A Finnish SME active in the field of distributed energy production systems using wood and other biomaterials as fuel has developed effective and environmentally friendly systems and solutions. The company wants to improve the efficiency of its products by... více
An Israeli company specialising in producing highly technological flex-rigid PCB's, has free facilities and innovation technology for their production. They are looking for partners in need for the offered technology / products or for integrating it in... více
An Israeli SME is looking for new techniques in the metal surface chemical treatment technologies, as passivation, electropolish, etching, conversion coating. Ideally, the technique should treat stainless steel & alloys, titanium, nytinol, tungsten... více
An Israeli manufacturer of gear-based products is looking for a technology to produce gearboxes and transmissions for wind turbines. Ideally, the developed product should fit wind turbines with a power capacity of 1-3 MW. The technology/product... více
An Israeli SME is looking for a technology to separate metal and plastic components from wastes of electronic industry. Ideally, the technology should contain 3 stages of waste processing: shredding, grinding to powder and separating the metal part from... více
An Israeli SME, which specialises in rapid cooling applications and energy storage, is looking for Uninterruptible Thermal Supply System to modernise and improve via integration with their green & efficient slurry ice technology for power supply... více
An Italian SME, maintainer of an open source next generation accessible portal, is looking for IT companies and organizations all over the world that are interested to join the "Ecosystem Partners Program" and offer to their customers (public and private... více
An FP7 Research for SMEs consortium, led by an East of England based Research Centre is looking for a partner for a Research for the benefit of SMEs proposal. The project aims to develop and validate ultrasonic NDE techniques for welded joints in... více
A Turkish company, active in manufacturing cleaning materials and hygienic chemicals, is looking for cost effective technologies for producing PLA packaging, suitable for their products. The company wants to insert PLA packaging production in their own... více
A Turkish SME, engaged in production of personal hygiene products, seeks innovative production methods for manufacturing shampoo, liquid hand soap, shower gels, etc. without the base of sodium lauryl sulphate. The Turkish company is ready for signing... více
A Polish company a producer of wide range of powdered mixtures for baking and confectionary industry - is interested in the purchase of automatic packing machine for packing powdered ice cream mixtures. The company is looking for cooperation on the basis... více
A Turkish company is looking for a carbon dioxide laser technology for engraving, texturing, imaging and micromachining the surface of cylindrical forms. Preferably, technology shall be already on the market. Company is looking for a joint venture... více
A Spanish branch of an international company of household products is looking for ready to market foam and gel dispensing technologies for home care market applications. Prototypes available for validation, or other reported proof of concepts are... více
A French SME is looking for skills for (semi)-automating packaging and handling of pieces (food packings) at the end of an injection-moulding production line. The need is a feasibility study in order to define the specification of the future equipments.... více
An Andalusian company, working in the field of aeronautics, is looking for technologies for resin and glass/carbon fiber treatment. With this technology they would like to improve a process aimed at recovery and recycling carbon fiber composites. The... více
A UK university is working on a FP7 proposal to develop low cost, safe and environmentally-friendly nanostructured inorganic materials for use as solar powered photocatalysts for the production of hydrogen fuel from water. The rational chemical design... více
A french university is looking for SMEs as partner of an ongoing european project. The aim of the accepted NMP-FP7 project is to explore the properties and possible applications of bismuth and bismuth based compounds when they are synthesized at the... více
An Israeli manufacturer of polymer films and packaging is looking for a technology to improve oxygen and water barrier properties of polyethylene films, intended for use as packaging in the food, medical or chemical industry. The requested technology... více
A Turkish company operating in Balikesir region, is producing steel metal ball for grinding machines. Company that produces balls by hot forging, is looking for technology that uses ball hot rolling mills to increase its capacity. Company is looking for... více
A French company, expert in biological waste water treatment, is looking for an industrial partner able to provide marketable, robust, easy to maintain and cost effective ultra filtration modules for water treatment. Description: The company has got... více
A French company specialized in design and manufacturing of hydraulic and pneumatic components is looking for a material for bushing part of connectors. více
A Spanish University is looking for partners for a joint research project which objective is the creation of a new standard modelling language and a methodology to unify the design, the integration and the simulation of advanced nanoelectric components... více
An SME from Northern Sweden is developing touch-free systems for monitoring and logging machines, items and products for optimising production information and logistic control of process and production perfomance in heavy industries. The company is... více
A Turkish SME, experienced in robotics systems and solutions, is looking for a cutting process, which will be used for cutting acrylic fibres that are squeezed between rollers during fibre production. The company is interested in commercial agreement... více
A SME from northern Sweden is looking for suppliers of dyeing pigments and processes applicable for cellulose based materials such as jute. Description: The company produces home decoration items from sustainable raw materials such as jute, cane and... více
Abstract: A multinational active in the consumer goods sector looks for automated ways of detecting and measuring online and off line 3D defects in 3D packaging production lines. The company will favour partners with existing technologies but is... více
A Turkish company is looking for a technology providing contactless polyethylene film welding to be used in packaging processes. Preferably, technology shall be already in market. Company is looking for a commercial agreement with technical... více
A Polish SME company from the metal machining is looking for new technologies and methods of permanent marking. New technology marking will be used as the final operation after the machining process. The sought technology should be available for... více
A large US company is looking for proposals for technologies that can serve as a conductive element in textile applications. They are interested in licensing, product acquisition, contract research, proof of concept leading to scale up to manufacturing,... více
A large German research institute has developed a flexible section-machining with automatic handling and processing of bent extruded sections which enables low costs. This technology is based on the combination of a parallelkinematic processing machine... více
An Estonian SME developed various methods of in silico modeling of (bio)chemical properties and interactions. Modeling can be used in research of new chemicals in industrial or pharmaceutical fields. The SME is looking for partners in related industries... více
Polish SME developed a system for quality control in gluing process of envelopes and corrugated paper boxes. It is attached to a machine and helps in recognition and marking of defectively glued products that can easily be removed from production line.... více
A Bulgarian SME has developed an innovative halogen-free flame retardants for application to flammable polymers with various physicochemical properties and structure like textiles, wood, paper, leather, polystyrene and penopolyurethane. The technology... více
A small engineering office from the north of Germany developed CCTV which receives all needed energy by its attached solar panels. Due to that additional external electric power supply is not necessary. This autarkic supply makes the system especially... více
An Israeli SME has developed an electronic chip for ultra-wideband communication. Advantages over other wireless means currently on the market include its superior performance, low-cost, for wild-world operation and low power use. The company is looking... více
A Dutch company is specialized in the development and production of foamed plastic materials for geneneral industrial use and also in the aviation, automotive and building sector. The company is world market leader in many applications and produces its... více
A small Dutch company has its core-competence in laser micro machining of plastics, ceramics, glass and thin metals. The high precision laser shaping process allows burr-free finishing of products characterized by extremely small features. Apart from... více
A Polish SME company from the tool industry is looking ecologic cutting fluid for use in machining of tool steel. Cutting fluid should be fully organic, water soluble and does not contain mineral oil, chlorine and phenolic compounds. The company is... více
A Turkish SME is looking for a partner in the field of motor vehicle conversion into electric vehicle. The company wants to provide electric batteries, charging centers/stations for electric vehicles. The developed/under development technology is... více
Francouzská společnost hledá výrobního dodavatele solárních panelů splňujících nové národní předpisy pro soukromá obydlí, které začaly platit od počátku roku 2011. Společnost hledá dodavatele pro uzavření obchodní smlouvy... více
A Turkish nanotechnology SME is active in developing multifunctional nano-coatings for various applications. It is willing to develop new, innovative coatings with unique properties to be used in certain applications such as solar panels. In this respect,... více
A French company proposes a new alternative daily or weekly landfill cover. This new/innovative product fixes paper, fabrics and plastics, reduces odours and avoids the spreading of landfill waste fire on surface. The product is a white powder to be... více
A German SME located in south eastern Saxony is a specialist for handling technologies. The company offers a technology for the assembling of small and middleweight reactance coils. The system handles the 2 coils, of different sizes, with an equal level... více
A German SME in the East of Saxony is a specialist for elastomer products and developed a new technology. These products are profiles, rubber-bonded metals, form items, special rubber frames, rubber-plastic connections etc. according to the customers... více
Metalcam, one of the most valued Italian companies of high quality steel forgings, produces a wide range of high quality forgings made of carbon-steel, medium-alloy steel and stainless steel, engineered and produced also for specific needs. Metalcam... více
EVC-deutschland (European Van Conversion) with headquarter in Hanover, Germany is primarily specialised in fitting, installing and integrating automotive systems/solutions in commercial and utility vehicles. EVC-deutschland is a qualified partner of... více
A London University have patented a new, cost-effective and robust method for synthesising a high yield of uniform nanoparticles of well-defined size, which will greatly assist the exploitation of nanoscale phenomena. The University are looking for... více
A Scottish company (UK) has become a leader in recycling tyres into compressed tyre bales which can be used in civil engineering projects. The process is simple and low cost and produces a product to a recognised standard. The company has already... více
Small company from eastern Poland is looking for a laser (source of light, glassware and optics)for the production of tools made of tungsten carbide covered with diamond. The laser will be used for cutting. The technology needs to be ready to adaptation... více
Londýnská společnost vyvinula stavební materiál založený na slámě z pšenice. Výrobek má lepší vlastnosti než většina běžných stavebních materiálů a vynikající posudky v oblasti šetrnosti k životnímu prostředí. Společnost... více
An innovative French SME has developed a European-certified solution for security & safety in internet: identification of internet sites, data exchanges protection, internet users authentication. Companies, web agencies, e-commerce enterprises, public &... více
A London-based university has developed a miniature refrigeration system for improved cooling of microelectronics devices. The university is producing a prototype and is looking for partners to test and implement the device. On a longer term, the... více
An institute of a German university specialised in low-pressure microwave plasmas has developed plasma processes applicable at the industrial level for surface treatment and coating convenient for a great variety of polymers. Plasma coatings provide... více
A French company specialized in aircraft design has developed an agile microlight aircraft dedicated to forests supervision, scouting, land recon, sea rescue and border patrols. An important feature is that it is able to fly at a very low speed (50km/h)... více
A French company has developed a new way to coat metallic and mineral surface in a rapid and efficient process easily scalable to industry. Bisphosphonic perfluoropolyether used to coat surfaces to form hydrophobic and lipophobic self assembled... více
An Israeli SME athat provides solutions for the industrial, commercial, civilian and agricultural sectors has designed and developed a new product for treatment of open hot water systems for consumption. The product can solve damage of scale, corrosion,... více
A multi-national electronics company based in Scotland (UK) offers its unique expertise and foundry for silicon carbide (SiC). The company has the ability to support technology startups through postincubation to commercialisation as well as companies... více
A start up company from Slovenia has developed and produced waste water treatment system for cleaning rain, technological and industrial waste water. Company was involved for fifteen years in USA and has additionally improved new technology of separation,... více
Hungarian SME developed an industrial product design and manufacturing technology and its methodology. It is based on rapid prototyping and 3D computer-aided design. Its advantage is that it covers the whole range of product design and modelling... více
Dánská firma hledá výrobce tabulí/archů z vlnitého polypropylenu, které odolají sterilizaci, budou v 8 barevných odstínech, a mají požadované hodnoty: 1,5 - 10 mm síla, 200 - 2000g/m2. více
Dánská velkoobchodní firma má zájem o obalový materiál - vlnitou lepenku, LDPE materiály a pásky. více
Nadnárodní společnost ze sektoru spotřebitelského zboží hledá cenově efektivní alternativy silikonu pro zlepšení pocitových, dotekových a třpytivých vlastností spotřebitelských výrobků, jakými jsou prací prášky, změkčovače... více
Flubetech is a spin-off of the Group of Materials Engineering of The Chemical Institut of Sarrià, Ramon Llull University based in Barcelona (SPAIN). It is a high tech company that develops and commercializes metallic and ceramic advanced coatings as... více
A Swedish SME and has developed range of Infrared Photodetectors for intergration in infrared modules, cameras and imaging system. Applications area are identification of object by their thermal/IR radiation. The company offers also their QWIP FPA´s... více
A multi-national electronics company based in Scotland (UK) offers its unique expertise and foundry for silicon carbide (SiC). The company has the ability to support technology startups through postincubation to commercialisation as well as companies... více
A Slovenian SME offers a novel approach of developing customized power modules that are used in automotive, marine, industrial applications and in hybrid vehicles electrical traction systems. The novel approach is achieving higher electrical and thermal... více
A Swedish research institute develops materials and technologies for printed electronics. In search for electronic functional printing inks, they have identified gel nanoparticles of polysaccharides or synthetic polymers as suitable components. They are... více
A small company in South East Sweden has developed some innovative and fully unique processes for treatment of polymers. One of these processes restores the crystallinity of polymers, which is extremely important when producing polymer components with... více
A French SME has developed innovative access control systems using contactless smartcards. These systems can be used for transport, industry, catering, harbor management, money, following up The company is looking for partners for technical cooperation. více
An Andalusian new technology based SME has developed a new solar reflector for concentrating solar- thermal power plants of any technology. It replaces the existing, providing a significant technical development on them. Its main advantages are the... více
Laser cladding technology is an innovative technique used for the melting and deposition of any material by powder blown onto flat or 3D substrates. Local welding by laser beam allows sensitive substrates to be addressed without damage. A large range of... více
An Italian academic group intends to submit a proposal to Eurostars to develop an extensible wind tower with significant nominal power to appear in a limited period of the year. It should have an external telescopic structure, for the balance of the... více
Lithuanian textile company plans to open a new laboratory. The company is seeking for compact laboratory equipment that can add silver molecules/ions to different kinds of fabrics and/or thread bobbins. The adding of silver molecules/ions should not... více
An italian inventor has developed an innovative stapler that is also able to remove the stiches applicated thanks to a sophisticated mechanism that has been patented. The inventors is looking for industrial partners for the stapler's production or for... více
A Swedish SME, specialising in material handling equipment for the manufacturing sector, is offering handling system based on an over head rail system in aluminium with standardised, yet versatile, lifting equipment. The company is looking for... více
A Swedish spin-off company has developed a new method for manufacturing electromagnetic components for electrical engines and generators. The technology enables the integration of electromagnetic components in a wide range of apparatus and provides... více
Britská společnost hledá velkovýrobce kol využívaných u vozíků a dalších manuálně poháněných produktů (dětské sportovní kočárky). Ideální výrobce by měl vyrobit velké množství koleček, mít vlastní designový tým a být... více
A Turkish company specialized on wind turbine systems is searching for technology, product and partner company to develop their systems. The company is seeking partners in Europe which have an industrial process and want to call on the expertise in wind... více
We offer production and purification of recombinant proteins using bacterial cells such as E. coli and L. lactis. We have expertise in molecular cloning, fermentation, purification and characterization of recombinant proteins. We have developed an... více
An Israeli SME has developed and manufactured a cutting-edge irrigation computer designed for autonomous irrigation enabling the plant to irrigate itself, when and how much needed (without human intervention). The irrigation computer is applicable to any... více
A small research company aimed at forming material R&D is looking for a technology in order to enhance lifetime and wear resistance of dies by the applying of new tool steels which have been developed by the company and new heat treatment procedures... více
A Spanish University has developed a novel system that integrates computational techniques concerning dynamics systems and intelligent learning schemes. The goal is to design efficient optimal control algorithms in order to be applied to any non-linear... více
Textile-reinforced concrete has many advantages compared to the usual steel-reinforced concrete. In cooperation with a research institute and other companies, a medium sized German construction company and a large textile company have realised... více
Polská společnost specializující se na biologické způsoby odstraňování zápachu hledá technologii pro neutralizaci zápachu využívající biofiltry a chemické filtry. Společnost hledá partnery pro výměnu informací a technickou... více
Hledám firmu s výrobním zázemím kovovýroby,dřevovýroby ( obojí stavebního charakteru), a skladových prostorů, do které přinesu vlastní kompletní lety ověřený a vyzkoušený výrobní program , vč nových ještě nespuštěných... více
Polský výrobce různých plastových komponent hledá dodavatele vhodného PVC materiálu. Společnost přednostně hledá výrobce plastových rámů oken, kteří jsou ochotní prodávat výrobní PVC odpad. Společnost má rovněţ zájem... více
Universita v Gdansku, severním Polsku, hledá partnery do projektu - think-tanky, univerzity, nevládní organizace, organizace podpory podnikání - do projektu "FORAB - Flow Of Resources Across Borders". Projekt bude podán do 7.RP a bude se věnovat... více
One of the leading agrochemical products manufacturers of Turkey, mainly producing glyphosate is expanding its production facilities with a new factory in Nigde to produce glyphosate compounds. They are in the phase to prepare technology infrastructure... více
A Spanish public research organization has developed a procedure for obtaining ceramic granulated powders that can be used as feedstock for thermal spraying. The main advantages are the possibility of obtaining spherical powders, with a particle size... více
This objective aims at capturing the creative potential of young researchers by fostering their leadership and participation in collaborative research projects targeting first-ever, exploratory, multi-disciplinary research. This exploration should be... více
Polská společnost zabývající se protézami, umělými končetinami a rehabilitačními pomůckami a vybavením hledá partnery z oboru ortopedie a protetiky. Společnost by ráda ustanovila spolupráci za účelem zavedení nových technologií... více
Schaffer & Partner je mezinárodně činná skupina daňových poradců, auditorů a advokátů. Hlavní kancelář v Norimberku byla založena již v roce 1987 a v současné době tvoří mezinárodní pracovní tým skupiny Schaffer & Partner... více
Španělská inženýrská společnost zabývající se rovněž kontrolou kvality, jenž pracuje v oblasti stavebnictví (silnice, železnice, přístavy, letiště) hledá subjekty pro spolupráci na vývoji a testování nových materiálů... více
Ruské technologické centrum z Moskvy vyvinulo systém pro individuální účtování dodávek tepla a elektrické energie. Systém je založen na bezdrátové technologii a může být instalován beze změn na distribučních sítích. Centrum... více
Představitel čtyř britských univerzit z hrabství Yorkshire s předními světovými odbornými znalostmi hledá formující se konsorcia k současným výzvám 7. rámcového programu s přáním je doplnit. Jedná se o oblasti: Offshore Wind... více
Turecká firma hledá partnery do připravovaného projektu v programu EUREKA.Projekt se týká využití obnovitelných zdrojů energie, více informací včetně popisu projektu naleznete. více
Zajímá nás jednoduchý přenosný přístroj, který je možný vzít s sebou na stavbu a zkontrolovat dodaný materiál. Prosím o zaslání cenové nabídky včetně technických specifikací (případně katalogového listu). více
Francouzská společnost chce zahájit výrobu ekologicky šetrného dopravního značení a ekologických materiálů s přibližně shodnými vlastnostmi (průsvitnost, odolnost proti poškrábání, odolnost proti UV záření) jako polykarbonát.... více
Švédská firma hledá malou českou biotechnologickou firmu s vlastním výzkumem a vývojem splňující kritéria pro malý až střední podnik jako partnera pro projekt Eurostars (www.eurostars-eureka.eu). Projekt bude zaměřen na vývoj... více
Britská společnost s největší on-line databází o aktuálních cenách ve farmacii, hledá evropské partnery s podobným přístupem k informacím o značkových generických a zdravotnických výrobcích a cenových údajích. více
Milánská obchodní komora (Milan Chamber of Commerce) nabízí své odborné znalosti a zkušenosti potenciálním partnerům či konsorciím, které předkládají návrh projektu v programu Central Europe (CE). více
Španělská společnost hledá partnery pro účast na Evropském projektu "Business Intelligence Solution for Analysis and Decision Making" (Eureka, Eurostars,...). více
Francouzská strojírenská firma LAROCHE - Group Industries má zájem o subdodavatele - poptávají obráběče, mechaniky, svářeče, kotláře a montážníky. více
Finská společnost Valmet Automotive – service provider pro automobilový průmysl - má zájem o spolupráci s dodavateli volantů (bez airbagů) a vnějších automobilových komponentů, včetně jejich povrchové úpravy, vyrobených technologií... více
Firma z Ekvádoru má zájem o náhradní díly pro automobily Škoda . více
Dánská firma hledá spolupráci s ISO 13485 / FDA certifikovanou společností zabývající se vývojem v oblasti zdravotnických prostředků, nebo jen hardwaru, mechaniky a/nebo softwaru. Dále má firma zájem navázat spolupráci se společností... více
Bulharská firma Minkov Commerce hledá českého dodavatele kyseliny citrónové. více
Belgický výrobce a dodavatel barometrů, teploměrů a hodin hledá v ČR dodavatele kvalitních dřevěných dílů pro barometry - ořech apod. více
Italská potravinářská firma vyrábějící těstoviny hledá partnera nebo koordinátora projektu z oblasti VaV k vytvoření nového konsorcia do 7.RP nebo Eurostars. více
Malá strojírenská společnost hledá ultrazvukovou technologii svařování měděných nebo hliníkových plechů s měděnými trubkami. Společnost hledá obchodní smlouvu s technickou asistencí. více
Španělská společnost vyrábí svorky používané k opravě trhlin ve vodovodním potrubí. V případě prasknutí potrubí jsou použita těsnění pro zacelení trhliny a vyřešení problému. Svorky jsou vyrobeny z vnějšího pláště z... více
Italský výzkumný ústav chce testovat efektivnost fólií sloužících k uchování kvality potravin. Hledány jsou společnosti vyrábějící účinné obaly použitelné pro čerstvé nebo v minimální míře zpracované ovoce, zeleninu, ryby a... více
Italský výrobce interiérových dveří má zájem o spolupráci s jinými společnostmi za účelem realizace mikrogenerátoru elektrické energie využívajícího odpadní dřevo a jeho deriváty. Společnost hledá průmyslové podniky působící... více
Dr. Schott, jednatel společnosti ROTECH hledá kontakty pro sdružení tří saských vědeckých center, ROTECH/ místo výzkumu Rossendorf u Drážďan, Technologické centrum/TPM Mittweida a Obchodní a inovační centrum/Business and Innovation... více
Americká společnost hledá návrhy pro vývoj nových a lepších způsobů strojního vytváření mikro trojrozměrných tvarů z nerezové ocele. více
Řecká společnost hledá technologie a vybavení pro výrobu cihel z nepálené hlíny (vepřovic). Cihly by měly sloužit k výstavbě tradičních domů, využívajících jednoduchých domácích materiálů se sníženou energetickou náročností... více
Oblasti: Satelitní navigační systémy, telekomunikace více
Irská firma podnikající v oblasti logistiky vyvinula optimalizační software, který vytěžuje palety se zbožím před jejich přepravou. V současnosti je program denně používán výrobcem potravin k přípravě dodávek do velkoobchodního... více
Hledáme investora pro technologickou linku depolymerizace plastu. více
Polská společnost hledá partnera schopného změřit úroveň stopových znečišťujících látek a vyhodnotit jejich vliv na pitnou vodu ve vybraných městech a venkovských oblastech. Preferovanou formou spolupráce je obchodní smlouva s... více
Španelská spolecnost Industrias Monzon S.L (Zaragoza), působící v dřevařském průmyslu hledá partnera do projektu zaměřeného na vývoj e-systému pro podporu managementu v oblasti dřevařství, zejména v oblasti value chain managementu. V... více
Do mnoha připravovaných projektů, financovaných ze 7. RP hledají koordinátoři projektu malé a střední podniky, se kterými by mohli spolupracovat na rešení výzkumných a vývojových projektů. Výhodou této spolupráce je mimo jiné... více
Nabízíme volné kapacity na CNC soustruhu s poháněnými nástroji, klasické frézce a soustruhu. http://home.tiscali.cz/kovodvoracek/ více
Rakouský podnikatel hledá průmyslového partnera pro výrobu drátěného výrobku, jenž musí být vytvarován do předem definovaného tvaru. Průměr drátu je 2,5 mm a měl by být zakřiven dle specifického designového vzoru jediným postupem.... více
Polská společnost hledá technologii výroby ložiskových těsnění s vícepólovým magnetickým enkodérem (magnetických impulsních kroužků) pro kuličková ložiska. Jedná se o automobilová kolová ložiska v trakční kontrole... více
Nadnárodní společnost se sídlem ve Velké Británii hledá partnery z oblasti průmyslu nebo výzkumu pro společný vývoj počítačového modelu rotačního rozprašování kovů v ochranné atmosféře. Partneři s odpovídajícími schopnostmi a... více
Hledám odběratele kvalitních výrobků v oblasti pálení přesných tvarů z kovových materiálů. více
Zhotovení kvalitních výrobků v oblasti pálení přesných tvarů z kovových materiálů. více
Nadnárodní společnost se sídlem v Bruselu hledá technologický postup, který je všestranně použitelný k aplikaci na polyolefinové filmy, lahve a/nebo netkané textilie a zvýší jejich neprůhlednost tak, aby byl skryt jejich obsah.... více
Hledáme partnera pro vývoj jehel. více
Hledáme partnera pro výzkum a vývoj povrchových úprav jehlové a drátové oceli (leštění, niklování, zinkování). více
Hledáme partnera pro vývoj nebo kooperaci při navařování jehel na držáky a jejich sterilní zabalení. více
