Název projektu:
PS: FP7-SME-2012 - Innovative Integrated Device For Cooling System Applied On Household Refrigerators and Freezers (11 IT 54V7 3M86)
Popis:
An Italian SME operating in the area of electro-mechanical compressor accessories is preparing a proposal. The project will establish news standards for refrigerators and freezers compressors management and accessories.
It will replace several current devices as Starter, Overload Protector, Terminal board, Thermostat by means of a fully integrated device. Expected benefits: from appliance electrical power saving to productivity.
3 SMEs interested in the results of the project are searched for.
The project is finalized to develop a compressor management device to be installed on the compressor with the following functional characteristics:
o Compressor start management
o Compressor assisted operation
o Compressor overload protection
o Cooler thermostatic operation
o Universal terminal board
o Fast compressor connection
To achieve consistent savings (energy, number of codes to be managed, parts required and assembly line time) the global compressor market will be addressed.
Specifically the new device will reduce the energy required to actuate the motor during the starting phase and, in conjunction with a new motor designed to optimize the energy consumption, in the cooler steady state operation.
In addition the component will achieve the refrigerator thermostatic operation without the need of a temperature sensor inside the product.
The new device will also implement a new compressor coupling design where the parafusute will no longer be required.
This coupling, in turn, will favor the mechanical simplification of the whole device provided that the mechanical and electrical couplings are designed in a new way that also will simplify compressor and freezer production processes.
Overall the project is expected to give a 20% energy save and also a 20% reduction of total production costs of the device that currently manages the compressor.
To this will have added the cost savings of the freezer and compressor producers.
Other relevant application areas are expected in industrial sectors characterized by:
" long time running each day " small split-phase induction motors operating from single-phase mains supply (i.e. not 3-ph)" motors to be used in large quantities in low cost applications
Some ideas for application areas are water pumps for conventional heating systems; water pumps for solar heating systems; water pumps for garden ponds, fountains etc. ; swimming pool pumps; ventilation fans; air conditioning fans; air conditioning compressors.
Technical Specifications / Specific technical requirements:
Call title: Research for the benefit of SMEs
Call identifier: FP7-SME-2012
Publication date: 20 July, 2011
Deadline: 6 December 2011
Estimated budget: 1,5 M¬
Current stage of development of the project: under preparation
REQUIRED PARTNERS
Three Small Medium size Enterprises (SME) from a nation different from Italy:
" in the electronic sector producing boards and assembling IC on them" in the single phase induction motor design" in the forming and tools for metal parts , special connectors
It will replace several current devices as Starter, Overload Protector, Terminal board, Thermostat by means of a fully integrated device. Expected benefits: from appliance electrical power saving to productivity.
3 SMEs interested in the results of the project are searched for.
The project is finalized to develop a compressor management device to be installed on the compressor with the following functional characteristics:
o Compressor start management
o Compressor assisted operation
o Compressor overload protection
o Cooler thermostatic operation
o Universal terminal board
o Fast compressor connection
To achieve consistent savings (energy, number of codes to be managed, parts required and assembly line time) the global compressor market will be addressed.
Specifically the new device will reduce the energy required to actuate the motor during the starting phase and, in conjunction with a new motor designed to optimize the energy consumption, in the cooler steady state operation.
In addition the component will achieve the refrigerator thermostatic operation without the need of a temperature sensor inside the product.
The new device will also implement a new compressor coupling design where the parafusute will no longer be required.
This coupling, in turn, will favor the mechanical simplification of the whole device provided that the mechanical and electrical couplings are designed in a new way that also will simplify compressor and freezer production processes.
Overall the project is expected to give a 20% energy save and also a 20% reduction of total production costs of the device that currently manages the compressor.
To this will have added the cost savings of the freezer and compressor producers.
Other relevant application areas are expected in industrial sectors characterized by:
" long time running each day " small split-phase induction motors operating from single-phase mains supply (i.e. not 3-ph)" motors to be used in large quantities in low cost applications
Some ideas for application areas are water pumps for conventional heating systems; water pumps for solar heating systems; water pumps for garden ponds, fountains etc. ; swimming pool pumps; ventilation fans; air conditioning fans; air conditioning compressors.
Technical Specifications / Specific technical requirements:
Call title: Research for the benefit of SMEs
Call identifier: FP7-SME-2012
Publication date: 20 July, 2011
Deadline: 6 December 2011
Estimated budget: 1,5 M¬
Current stage of development of the project: under preparation
REQUIRED PARTNERS
Three Small Medium size Enterprises (SME) from a nation different from Italy:
" in the electronic sector producing boards and assembling IC on them" in the single phase induction motor design" in the forming and tools for metal parts , special connectors
Požadavky na partnera:
Requested Cooperation: Joint further development
- Type of partner sought: three Small Medium size Enterprises (SME) from a nation different from Italy
- Specific area of activity of the partner:
1) SME with capability of producing printed circuits and mounting of chips on them in large numbers (millions). The company shall be interested in improving their knowledge on how to reduce space and how to fit the printed circuit in a device that will undergo mechanical vibrations and that has to have a lifetime of more than [10 years]
2) SME with capability of single phase induction motors.
The SMEs shall be in the position of improve their business in a significant way if the project results are achieved.
3) SME specialised in forming and special tool to be in condition to modify a glass metal connector.
- Task to be performed by the partner sought:
1) interest in devellopping and producing circuits for energy savings and interest to be introduced into the domestic appliances market
2) improvement of efficience of induction motors
3) possibility to open to a new tipe of connectors metal glass or production of special tool
- Type of partner sought: three Small Medium size Enterprises (SME) from a nation different from Italy
- Specific area of activity of the partner:
1) SME with capability of producing printed circuits and mounting of chips on them in large numbers (millions). The company shall be interested in improving their knowledge on how to reduce space and how to fit the printed circuit in a device that will undergo mechanical vibrations and that has to have a lifetime of more than [10 years]
2) SME with capability of single phase induction motors.
The SMEs shall be in the position of improve their business in a significant way if the project results are achieved.
3) SME specialised in forming and special tool to be in condition to modify a glass metal connector.
- Task to be performed by the partner sought:
1) interest in devellopping and producing circuits for energy savings and interest to be introduced into the domestic appliances market
2) improvement of efficience of induction motors
3) possibility to open to a new tipe of connectors metal glass or production of special tool
Obchodní firma/fyzická osoba:
Technologické inovační centrum s.r.o.
Sídlo/Místo podnikání:
Vavrečkova 5262
760 01 Zlín
760 01 Zlín
Kontaktní osoba:
Lenka Kostelníková
Email:
Telefon:
+420 739 570 792
